fuel pressure estimate at WOT
#1
Senior Member
Thread Starter
iTrader: (17)
Join Date: May 2005
Location: NO VA
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
fuel pressure estimate at WOT
Anyone know an idea on what the fuel pressure is at WOT, I'm deciding if I need to run ss lines from the fuel tank to the rails or otherwise use a earl's compression nut fitting to the feed hardline...supposely Earl's only handles up to 50psi, but I've read otherwise
#3
rotorhead
iTrader: (3)
If it is base fuel pressure + boost pressure.
If you are doing a fuel system, you could clamp the AN line to the factory hard line. I have been doing this for years. There are nice-looking hose clamps available:
http://www.racepartssolutions.com/products.asp?cat=19
If you are doing a fuel system, you could clamp the AN line to the factory hard line. I have been doing this for years. There are nice-looking hose clamps available:
http://www.racepartssolutions.com/products.asp?cat=19
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM