hi,
i am thinking to upgrade the oem filter with a cleanable one like aeromotives. am i right or wrong?
i see that there are some stainless steel framed 40 and 100 micron filters and some paper 10 micron filters.
what do you recomend?
do you recomend the cleanable ones?
are the 40 microns OK?

i will pull the rear subframe out in the next days and i think it is a good oportunity to relocate the filter. sould i replace the lines too?
any suggestion is welcome.

thanks!!

 

10 microns, in most cases oem lines are more than enough but what kind of setup are u running?

 

hi,
i have the stock setup in fuelling. thats why i am thinking to upgrade...
fuel pump and wiring are my next .
do you think that the 10 micron will clog frequently? can i use the 40 micron?
what about fuel lines?
thanks!!

 

i have been using 10 micron on 1000whp race cars and my highly boosted fd with no issues at all. U dont need to upgrade the lines. Upgrade your pump if anything.
If you get to clog a 10micron you should enter that fuel station in greece and blow their brains out :P (you obviously dont need to do it lol but its just a figure of speech)