Anybody making or selling an -an fitting fuel rail to replace stock and fit 550cc injectors?

 

you just need a adapter.

here are the summit adapters,
EAR-991954
EAR-991945

im guessing this is a fc by the 550 injectors.

ps. nice pic, lalita castra is so hot.

 

I saw someone selling an upgraded primary fuel rail that had -an fittings as well, but I don't remember who. It was a recent thread you should be able to find it.

K

 

by using the stock rail/injectors, you just need to tap the ends w/ 1/4NPT. and use pipe to AN fittings in order to make it work. just undo the screws on the ends of the rail, take the injectors out, tap and thread in the new fittings. i think i have an extra stock rail i can set up for you if you need it.

 

maybe you are right, but i think he has an FD??? thats what my first reply was to an FD primary rail.

 

on the S4 you can unscrew the ends, tap and use the correct fittings/pipe adapter. On the s5 rails you have to cut and weld on a male an bung and use whatever fittings you want. Or you can just have someone here make you one. I know crispeed, Kurgan, Silver7, and rxrotary2_7 make/or have access to them, PM them.

 

Recent thread

 

I pm'ed crispeed about his rail, this is for a s5 t2, and i have stainless fittings

the fittings are pipe to -an so a pipe threaded stock rail would be nice!

 

Crispeed hasn't responded!

 

yeh I PMed him also,

also no responce.

 

k2rd can do them as well

mike