FC exhuast manifolds
#1
Senior Member
Thread Starter
Join Date: Dec 2001
Location: Longmont, Co
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
FC exhuast manifolds
What options are there fc exhaust manifolds? So far I've only found the two offered on rx7store.net, the cast hks and xs engineering.
I'd like to find a divided manifold with long runners, but there doesn't seem to be anything out there. I'd prefer to find something with a t04 flange, but I'm looking for anything well designed and reasonably priced.
Also, I've heard most fd manifolds wont fit an fc, but are there any exceptions?
I'd like to find a divided manifold with long runners, but there doesn't seem to be anything out there. I'd prefer to find something with a t04 flange, but I'm looking for anything well designed and reasonably priced.
Also, I've heard most fd manifolds wont fit an fc, but are there any exceptions?
#3
Senior Member
Thread Starter
Join Date: Dec 2001
Location: Longmont, Co
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RETed
Not possible, unless you consider reasonably priced = $1,000?
-Ted
-Ted
I was thinking closer to $500. I mostly just hate the hks design, it seems like a step back from stock.
#4
Lives on the Forum
Originally Posted by incendui
I was thinking closer to $500. I mostly just hate the hks design, it seems like a step back from stock.
-Ted
#5
ASE in south australia has manifolds for the fc at reasoable prices their quality is the best i have seen try www.aseturbo.com
#6
Mad Man
RPM(HP in a Box) in AU offers a long runner manifold for the FC for around that price. It is quite doable. Alternately you can buy the flange from RB, and the pipes from Mcmaster. The total for all the materials you need is less than 175.00, that is for 2" sch 40 304 stainless steam pipe . Carl
Trending Topics
#8
RX-7 Bad Ass
iTrader: (55)
The HKS cast isn't fancy looking, but it has a LOT going for it -
- Dirt cheap.
- Bulletproof.
- Can make quite a bit of power.
- Bolts right up.
A lot of the tubular stainless manifolds have problems cracking at the joints, etc. The HKS cast manifold is damn near indestructible - no problems.
People have made well into the 400hp range on that manifold. It works.
Dale
- Dirt cheap.
- Bulletproof.
- Can make quite a bit of power.
- Bolts right up.
A lot of the tubular stainless manifolds have problems cracking at the joints, etc. The HKS cast manifold is damn near indestructible - no problems.
People have made well into the 400hp range on that manifold. It works.
Dale
#10
Senior Member
Join Date: Oct 2002
Location: San Ramon CA 94583
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dmm
ASE in south australia has manifolds for the fc at reasoable prices their quality is the best i have seen try www.aseturbo.com
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Group Buy & Product Dev. FD RX-7
7
03-21-18 11:19 AM
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM