Everything goes except OMP?
Passenger
Posts: n/a
Everything goes except OMP?
I've installed my T-88 kit, and I'm running the stock computer w/ HKS FCon. I'm attempting to delete the rats nest under the upper intake manifold, but came across 7 harnesses under the copper nest and 1 on top.What do I do? Take everything out(snip snip). And what about the bunch of harnesses left of the rats nest going into the lower intake manifold, can I delete. I don't want to screw things up as a part time mechanic, please help...
Junior Member
Joined: Feb 2001
Posts: 43
Likes: 1
From: West Covina, CA
You can't take out ANY sensors at all cuz you are still using stock ECU. You can use a resistor in replace the solenoids if you want.
If you want to have the clean look like other Single Turbo 7 guys do, you need to change your engine management system to Power FC, Haltech, Tec II, etc.
You get the idea because stock ECU still checks for the presence of those sensor and will emit 15-20 codes if you take them out.
------------------
Wayne
93 CYM R1
Prepaid Legal Independent Associate
http://www.prepaidlegal.com/go/wayneoun
If you want to have the clean look like other Single Turbo 7 guys do, you need to change your engine management system to Power FC, Haltech, Tec II, etc.
You get the idea because stock ECU still checks for the presence of those sensor and will emit 15-20 codes if you take them out.
------------------
Wayne
93 CYM R1
Prepaid Legal Independent Associate
http://www.prepaidlegal.com/go/wayneoun
Yellow Dragon is no more
Joined: Apr 2001
Posts: 1,687
Likes: 1
From: Knoxville, TN
Well, he could take them out.... but he will just have the error codes right? I don't think it does anything to the performance of the ECU. Regardless, don't snip the harness because you never know what you might need to do in the future. -- check your PM too
Thread
Thread Starter
Forum
Replies
Last Post
