Est. Power on this setup
#1
Brappidy Brap
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: South Jersey
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Est. Power on this setup
Hey guys im just about finished with the car but havnt gotten it tuned yet and i was just wondering if anybody has a similar setup. If so could you give me an estimate on power i may be looking at.
Thanx in advance.
FC
13bt Half-Bridge
Gt4088 w/ 1.19 hotside
Greddy manifold + Greddy 44m Wastegate
Modded TB
FMIC
No emissions
Fuel pump
KG primary/secondary
Microtech Lt12
If anyone needs more info lemme know
Thanx in advance.
FC
13bt Half-Bridge
Gt4088 w/ 1.19 hotside
Greddy manifold + Greddy 44m Wastegate
Modded TB
FMIC
No emissions
Fuel pump
KG primary/secondary
Microtech Lt12
If anyone needs more info lemme know
#3
Brappidy Brap
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: South Jersey
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Ok, motor is being completed at JPR by Jim and he is nasty with rotaries.
The tune is being done by his guy who only tunes microtechs.
The motor also has the RA superseals, newer plates and im reusing the rotor housings which are in good shape.
The tune is being done by his guy who only tunes microtechs.
The motor also has the RA superseals, newer plates and im reusing the rotor housings which are in good shape.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
08-31-15 07:49 PM