I was finishing up my Turbo Swap the other day when I noticed I needed to move a portion of the engine harness to get this piece on. I unclipped the harness down at the Crank Angle Sensors. I had no problem getting the top white one out but on the other gray one I had a problem and the wire came out of the clip. Now the clip is still usable and everything but I was wondering if I could reuse this same clip and just repair the wires in it with stuff from Radio Shack or do I need to get a new clip all together or is their a simpler way of making this work. Trust me I know the importance of the CAS and I am 100% nothing else was damaged but I was curious if anyone else had a good idea or a easier fix for this. To be exact the wire pretty much pulled out the back of the clip. Not on the sensor side but on the harness side.