im going with a duel setup and gonna plumb them in my greddy cast manifold. i wanted to put them on the sides but on one runner (rear rotor) the wastegate hole is close to the exhaust port on manifold . would that effect tempature readings?

like this
https://www.rx7club.com/attachment.p...1&d=1209481527

 

im gonna place the sensors as close to flange on exhaust port side, then the wg runner hole on rear rotor is about 1 inch away from port, not sure if thatll effect reading or not

 

http://s187.photobucket.com/albums/x...522_131813.jpg