EFI pump 4 water inj?
#1
Full Member
Thread Starter
Join Date: Dec 2001
Location: Australia
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
EFI pump 4 water inj?
Hi Guys
I'm hooking up a water injection system and wanna be able to run a 50/50 mix of water / meths.
Any comments on whether a FC EFI fuel pump would be ok to use? I'm figuring that the internals of the pump will be an alloy of sorts and hence will not rust cos of the water?
Comments / flames welcome
I'm hooking up a water injection system and wanna be able to run a 50/50 mix of water / meths.
Any comments on whether a FC EFI fuel pump would be ok to use? I'm figuring that the internals of the pump will be an alloy of sorts and hence will not rust cos of the water?
Comments / flames welcome
Last edited by shinjuku; 11-27-02 at 01:39 AM.
#3
Rotary Freak
Make a water tank that will hold pressure, get an adjustable valve that is opened by pressure . run a small hose to the tonk from the UIM to put pressure in the tank (boost ) . Another hose to the intake to spray the mix, or to the IC if that is what you want. When you boost the tank gets pressure then the valve opens and sprays the mix (water ect ) . Garfinkle has build this type system on his turbo charged motor cycle, it is simple and no pump to go bad. He got the valve from MR Turbo, the motor cycle turbo kit place.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM