e-bay wastegates???
#1
Senior Member
Thread Starter
Join Date: Oct 2005
Location: new zealand
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
e-bay wastegates???
ok has anyone use one of the cheap e-bay w/g. i need to get me one and i dont have big bucks to spend on one. my builder wants me to get a 50mm, so these ones that say they are 50mm, do they flow like a hks/greddy 50mm?? or should i get a bigger one like 60mm? allso the springs i heard they not very good. can you buy better springs? its for my fdrx7 with a gt35/40r. all other surporting mods done.
i did a seach in here, & the 3rd gen but found nothing.
here is one i was looking at, there are even cheaper ones out there. but this sound ok.
http://cgi.ebay.com/ebaymotors/60mm-...em300085651171
thanks
i did a seach in here, & the 3rd gen but found nothing.
here is one i was looking at, there are even cheaper ones out there. but this sound ok.
http://cgi.ebay.com/ebaymotors/60mm-...em300085651171
thanks
#3
Senior Member
Thread Starter
Join Date: Oct 2005
Location: new zealand
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
thanks, but if your going to buy me one, then i would be happy to get a good wastegate. anyway i just want to know if they would be ok for me. just as long as they can flow and hold the psi i'll be happy.
#4
Turbo widebody FB
iTrader: (1)
I strongly advise against it. A wastegate is a crucial part to a turbocharged vehicle. If it gets stuck closed, and doesn't properly open you will overboost and will have a huge repair bill. It's easily to do it properly the first time around and know the wastegate is going to function correctly. I can understand that you want to do it for cheap, but unfortunately you have to pay to play.
#5
Senior Member
Thread Starter
Join Date: Oct 2005
Location: new zealand
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
do i need a 50mm wastegate?? a got a stock mota, with the gt/35r, think it 106ar, got 1600cc/1000cc, power fc, fuel pumps, pretty much everything. the guy doing my car reckons it will have about 400hp when we finish. i do have a trust 42mm wastegate with 15psi spring. would that do?
#6
Back to the DrawingBoard.
iTrader: (32)
Join Date: Aug 2004
Location: Va
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
agree with the wastegate, i use the ebay one (50mm hks style) for a long time, until i reilize the same, works good until you start putting and mixing good parts with bad parts, so this is what i did, i use the ebay one until i get enough money or find a good deal on a real HKS 50mm, now im good and no more boost creeps, so is good for a goal and is bad in a long run, is your choice anyways
#7
Senior Member
Thread Starter
Join Date: Oct 2005
Location: new zealand
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
how bad were the boost creeps? was it just creeping, not spikeing? how long did you use it for and what alse did you have done?
and in my post above, its ment to say gt35/40r
and in my post above, its ment to say gt35/40r
Trending Topics
#8
Original Gangster/Rotary!
iTrader: (213)
Originally Posted by d1rx7
do i need a 50mm wastegate?? a got a stock mota, with the gt/35r, think it 106ar, got 1600cc/1000cc, power fc, fuel pumps, pretty much everything. the guy doing my car reckons it will have about 400hp when we finish. i do have a trust 42mm wastegate with 15psi spring. would that do?
stay away from the ebay stone racing/xs power/ss autochrome ****.
#10
Senior Member
Originally Posted by d1rx7
thanks for all the input guys, im selling the trust one, and just bought a 50mm hks (its real)
thanks
thanks
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM