do any of you guys run an upgraded oil cooler kit? this is mostly for the r1, r2 guys. And what type is it, if you made your own let me know

 

If your turbo isn't water cooled then it might be a good idea. Although the duel setup of the R1/R2's do a good job already.

 

I just had a set of CWC oil coolers installed in my car since the RX6 I have is oil cooled only. So in the interests of keeping my oil temperatures lower, I got them to be on the safe side

 

You don't really need too, stock one runs fine, but if you are interested rotaryextreme.com has a good upgrade kit.

 

In Seattle maybe, but not South Florida.

 

I do, its in my sig

 

I have dual oil coolers(stock) and my oil temps dont' really climb that high. I am EVENTUALLY going to get the larger dual oil cooler setup...but that's WAY down the line.

 

no, even in florida you really don't need too. I lived in jacksonville for 5 years, and visit every summer. I also lived in las vegas for 10 years and know hot climates, and I can tell you that the stock system works pretty good. If you are on the gas/racing a lot, then it might be good, but I have never had an issue that was related to the oil cooler.