crispeed !!fuel pump question!!!
#5
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: The First State
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by enzo250
If your serious about using alcohol, You should get a WELDON...
Take a look at the 2025 and 2035 weldon pumps.
If your serious about using alcohol, You should get a WELDON...
Take a look at the 2025 and 2035 weldon pumps.
Yea, thats the other one I was considering, I just wanted to keep my regulator, filters and the pump the same for possible sponsership reasons
#6
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: The First State
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 13BAce
Uh oh, are you doing what I think you're doing?
Uh oh, are you doing what I think you're doing?
Jim, I just picked up 4 more 1680s so now I have a total of 8 1680s for the secondarys and 720s on the primary
#7
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Greg
Jim, I just picked up 4 more 1680s so now I have a total of 8 1680s for the secondarys and 720s on the primary
Jim, I just picked up 4 more 1680s so now I have a total of 8 1680s for the secondarys and 720s on the primary
Trending Topics
#8
pumps
i might be wrong but the rating on that pump is for gasoline and not alchohol. that would mean that you could make only half of the rated h.p. with that pump and alcohol. i am using 8 1500cc lucas injectors ,dual ESSEX pumps , dual -10 lines to 2 seperate fual rails and one aeromotive regulator with a -8 return line. i am basically copying Flauta's new setup and he just went 5.70's (1/8)with only 500rwhp and a **** motor during his licsense runs!
i could be wrong but i think that is how it works.
i could be wrong but i think that is how it works.
#10
Greg I beleive the Aeromotive are not designed for alcohol. Also everyone that I know of that are running on alcohol are using two weldon 2025 pumps.
crispeed
In Orlando having traction problems!
crispeed
In Orlando having traction problems!
Last edited by crispeed; 10-27-01 at 07:16 AM.
#11
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: The First State
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by crispeed
Greg I beleive the Aeromotive are not designed for alcohol. Also everyone that I know of that are running on alcohol are using two weldon 2025 pumps.
crispeed
In Orlando having traction problems!
Greg I beleive the Aeromotive are not designed for alcohol. Also everyone that I know of that are running on alcohol are using two weldon 2025 pumps.
crispeed
In Orlando having traction problems!
can you find them for decent prices? cause I just looked on rays website and they were $699 each
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM