Calling M2 large owners
#1
Track junkie
Thread Starter
Calling M2 large owners
I need the pipe from the y-pipe to the IC end tank. Do any of you guys have some in your parts bin after going single. I tried contacting Kevin at ASP, but he doesn't sell that part. I ordered the Pettit pipe, but it doesn't work it's the wrong size! See Kevin they are different!
Thanks in advance, Patrick
Thanks in advance, Patrick
Last edited by patfat; 10-15-04 at 01:32 PM.
#2
13Bfiscalirresponsibility
Join Date: Feb 2001
Location: Hell and loving it
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
If you aren't running the air pump, all you need is a 90 degree 2.75" I.D. silicon coupler and a straight piece of aluminum piping with a 2.75" O.D.
Make sure the coupler has some decent length on the legs - ~4-5". I used a Samco coupler and just trimmed it down a little. As for aluminum piping, you can buy a straight piece probably at a local machine shop or fabricator. They might even have some for scrap. There are places you can order from online as well that are fairly cheap. Don't worry about getting too long a piece because aluminum piping is way easy to slice through even with a hand-held hacksaw.
Make sure the coupler has some decent length on the legs - ~4-5". I used a Samco coupler and just trimmed it down a little. As for aluminum piping, you can buy a straight piece probably at a local machine shop or fabricator. They might even have some for scrap. There are places you can order from online as well that are fairly cheap. Don't worry about getting too long a piece because aluminum piping is way easy to slice through even with a hand-held hacksaw.
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM