I am an FD3 Owner in the UK and looking at going single turbo on my FD. I have a stock motor and am looking to get around 450BHP max. I have been looking particulary a Borg Warner, Holset and Master Power turbos. I have had a few people recommend different sizes.
Can anyone give me any ideas or let me know what they are running and what power the have got?
Ihave had a recommedation of a Borg S200 with a 1.15 A/R and also from a different company (Mike Turbo INC) an S200 0.96 A/R with a Garrett T70 compressor to replace the stock one? Not sure if this mod makes sense or not?
I have also been suggested a master power T64 and a Master Power T70?

I would really appreciate some opinions as I am kean to get something good value from the US.

Thank you
Lee

 

You could try to reach bobybeach. He is out of NZ and is a distributor for Master Power.

The MP T-70 has the capability to dip into the 500hp range depending on how extreme you plan on going.

 

I have the borg warner S-362 a.k.a. tec ht300 a.k.a. R-85 and love the response it made 420whp @15psi thru the stock cat converter its a good street turbo the
s-200 is to small
What kind of power are you looking for? only pump gas important or race gas? whats the primary use of the car?
Ive only heard bad things about master power!

 

Thanks for the feedback guys'

I will be using the car for a fast fun road car at weekends.. maybe the odd strip or track day? it will run pump gas only whch is normally 98 ron here if you get the super. I have an apexi Power FC for it, Decat pipe twin induction which I will have to do something with if I go single turbo! Also have a Large SMIC.

I am initially looking at 400hbp but with scope to go up to 450-500bhp max.. I have a spare engine which I may port and rebuild.
I have not hear dbad things about Master Power yet.. In the UK people haven't really come accross them or BW.. To be honest i am more kean to go with the BW as I have heard veyr good things about them.

if you guy's say the S200 is too small I might looking into the S362. funnily enough someone else recommend that! What are your thoughts about the modified S200 Mike Turbos unit?? with the T70 compressor end?

Thank you
Lee

 

S362 here. I love it.

 

Cool!

Er how much is the BW S362 going for over there? Anyone got a good second hand one or can they recommend somewhere to get one? I am really torn between that and an MPT70 from the various feedback I am getting.

Thanks
Lee

 

S362 costs about 700euros over here in Greece

 

gt35r. i just put down 440 RWHP on a bone stock engine at 18-19 psi on pump
(93) and meth injection.