Anyone running a stock fuel system?
Anyone running a stock fuel system?
Is there anyone out there with the stock 550' 850's system? The reason I ask is because it's my understanding that the stock system will handle up to 400 HP. Is this true? I have just converted to single with a small to4b and am only looking for about 325ish rwhp with minimal boost.
Here's my mods just in case your curious:
Full custom 3-inch exhaust w/o cats.
Panspeed tuned ecu for a single.
KOYO Radiator upgrade
Custom FMIC/Greddy elbow
Block off plates all around
Here's my mods just in case your curious:
Full custom 3-inch exhaust w/o cats.
Panspeed tuned ecu for a single.
KOYO Radiator upgrade
Custom FMIC/Greddy elbow
Block off plates all around
I am running stock injectors with upgraded Walbro 255 fuel pump on a stock motor, To4e 57 with .84 a/r p wheel. I do run a 3 inch metal cat which keeps the flow in check a bit to keep the rwhp under 300 @11psi with 11.3-1 a/f ratios. In addition, M2 medium IC, Aquamist stage 1 water injection and PFC.
Last edited by Jack; Sep 6, 2005 at 02:31 AM.
No, the stock injectors max out at about 360, and you lose tuning control at about 330-340.
I wrote a web page that you can play with to see what kind of power different systems would support:
http://maxcooper.com/rx7/how-to/fuel_system/calcs.html
If you want your car to work reliably, be wary of pushing the limits of your fuel system.
-Max
I wrote a web page that you can play with to see what kind of power different systems would support:
http://maxcooper.com/rx7/how-to/fuel_system/calcs.html
If you want your car to work reliably, be wary of pushing the limits of your fuel system.
-Max




