AFRs and EGTs
Thread Starter
Joined: Apr 2002
Posts: 1,290
Likes: 0
From: Richland Center WI
12a turbo, 15 psi, streetport, basically stock internals, OER sidedraft, 3.5 in exhaust, GT35R stage V (Turblown.net), custom mani (Turblown.net). 8000Rpm redline
What kind of AFRs and EGTs should I be running Throughout the rpm range? My Egt probes will be in the mani on front and rear runner?
What kind of AFRs and EGTs should I be running Throughout the rpm range? My Egt probes will be in the mani on front and rear runner?
Probably about 11.1 at 15 psi 11.5 at 10 psi and 12 at 2 psi. Taper it inbetween those levels. Egts around 1600 - 1650. Keep
your air temps as low as possible, and aux injection is everyones friend
your air temps as low as possible, and aux injection is everyones friend
those are good guidelines. you can also play with the AFR and timing some. Some like to run a little more fuel (richer) with a little more timing. I prefer a little less fuel (mid 11's AFR) with less aggressive timing advance. Every engine is different.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
Oct 17, 2020 03:25 PM






