Af61 ( Fc) Kit Installed
#1
best person
Thread Starter
Join Date: Aug 2005
Location: Belleville IL
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Af61 ( Fc) Kit Installed
To All The People That Have Asked, I Am Currently Offering This Kit As Installed Only. I Just Don't Have The Time To Jig The Parts Right Now... I Custom Make Components As Installed. Includes Af61 Turbo, Manifold, 50mm Wastegate, Oil Lines, Charge Pipe From Turbo, And Downpipe (w/g Is Open Dump). 2-3 Day Turn Around. $2,400 Fd Available For Around $2,700.00 Installed. This Is Exactally Same Kit That Makes 420+hp @15 Psi On S5 T2. Please Pm For More Info.
#7
best person
Thread Starter
Join Date: Aug 2005
Location: Belleville IL
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TEZTnTUNE
haha if u knew how easy it is to get the stuff and make it u wouldnt be saying that
TRY TO THROW THE KIT TOGHTHER WITHOUT GOING THROUGH ME!
Trending Topics
#10
Banned. I got OWNED!!!
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by meddle
Just drove an af61 car again tonight. Whata great pump gas turbo.
#15
Banned. I got OWNED!!!
Join Date: Feb 2003
Location: Right below Orions belt
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
John from turbo center (builds hubers turbos) had obne of these apart the other day. Who couldn't figure out one anything was besides the comp wheels. All he knew is that it would spool and flow like a ****. He also mentioned that it was beefier than a lot of over the road diesal turbos.
#16
NorCal 7's Co-founder
Glad to hear that the turbo is as beefy as Davinci says it is. And it's not because I was doubting their product, but it's always nice to hear it from an outside source.
#19
Originally Posted by Alien
Another af61R going. s4 motor, 4 inch exhaust. 14-15 spi around 3500.
#21
Rotary Freak
Oooh, maybe I've finally found a turbo that'll work well for my application, seems like you have to boost the hell outta most turbos to get them into the higher efficiency ranges...any specs on compressor/exhaust housing A/R?
#22
Banned. I got OWNED!!!
Join Date: Apr 2002
Location: St Louis
Posts: 883
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by snub disphenoid
Oooh, maybe I've finally found a turbo that'll work well for my application, seems like you have to boost the hell outta most turbos to get them into the higher efficiency ranges...any specs on compressor/exhaust housing A/R?
Search, the specs whee posted in 2 threads. Unless reted had them deleted with is philangial diahrrea.
#23
I'll blow it up real good
iTrader: (1)
AF61R specs as follows:
t-4 flange
modular center/backwall
.313 dia. shaft
compressor has 4" inlet x 3" outlet
1.0 divided turbine w/4" outlet
small "Q" trim turbine 76mm x 68mm
compressor is 61mm x 84mm rated 82% @ 18psi 64#/min.
$750 ( V-band and flange are sold seperatly for 55.00 )
I'm also looking to get this turbo asap but have a few questions for the supplier. Anyway to get hold of him directly or some other way than pm'ing D-R Autosports?
t-4 flange
modular center/backwall
.313 dia. shaft
compressor has 4" inlet x 3" outlet
1.0 divided turbine w/4" outlet
small "Q" trim turbine 76mm x 68mm
compressor is 61mm x 84mm rated 82% @ 18psi 64#/min.
$750 ( V-band and flange are sold seperatly for 55.00 )
I'm also looking to get this turbo asap but have a few questions for the supplier. Anyway to get hold of him directly or some other way than pm'ing D-R Autosports?