Af61 ( Fc) Kit Installed
To All The People That Have Asked, I Am Currently Offering This Kit As Installed Only. I Just Don't Have The Time To Jig The Parts Right Now... I Custom Make Components As Installed. Includes Af61 Turbo, Manifold, 50mm Wastegate, Oil Lines, Charge Pipe From Turbo, And Downpipe (w/g Is Open Dump). 2-3 Day Turn Around. $2,400 Fd Available For Around $2,700.00 Installed. This Is Exactally Same Kit That Makes 420+hp @15 Psi On S5 T2. Please Pm For More Info.
|
That's too cheap......... You can't make any money that way :(
|
haha if u knew how easy it is to get the stuff and make it u wouldnt be saying that
|
Originally Posted by TEZTnTUNE
haha if u knew how easy it is to get the stuff and make it u wouldnt be saying that
|
I might be interested when you decide to make it so i can buy it and install myself :) Dont have the time to bring it out there.
|
Purchase the turbo and throw together your own kit.
|
Originally Posted by TEZTnTUNE
haha if u knew how easy it is to get the stuff and make it u wouldnt be saying that
TRY TO THROW THE KIT TOGHTHER WITHOUT GOING THROUGH ME! |
Anyhow, offering a 2nd gen AF61R turbo kit installed for 2,400 is damn cheap. Offering a FD AF61R turbo kit installed for 2,700 is damn cheap, too.
|
Just drove an af61 car again tonight. Whata great pump gas turbo. :)
|
Originally Posted by meddle
Just drove an af61 car again tonight. Whata great pump gas turbo. :)
|
call me.
|
right on, we're getting liquored up tonight........
|
last time i let that drunk drive my car
|
Originally Posted by johnrxt2
last time i let that drunk drive my car
|
John from turbo center (builds hubers turbos) had obne of these apart the other day. Who couldn't figure out one anything was besides the comp wheels. All he knew is that it would spool and flow like a mofo. He also mentioned that it was beefier than a lot of over the road diesal turbos.
|
Glad to hear that the turbo is as beefy as Davinci says it is. And it's not because I was doubting their product, but it's always nice to hear it from an outside source.
|
Another af61R going. s4 motor, 4 inch exhaust. 14-15 spi around 3500. :eek:
|
Yep, we said that it spooled like a mother.......
|
Originally Posted by Alien
Another af61R going. s4 motor, 4 inch exhaust. 14-15 spi around 3500. :eek:
|
Right on. :)
|
Oooh, maybe I've finally found a turbo that'll work well for my application, seems like you have to boost the hell outta most turbos to get them into the higher efficiency ranges...any specs on compressor/exhaust housing A/R?
|
Originally Posted by snub disphenoid
Oooh, maybe I've finally found a turbo that'll work well for my application, seems like you have to boost the hell outta most turbos to get them into the higher efficiency ranges...any specs on compressor/exhaust housing A/R?
Search, the specs whee posted in 2 threads. Unless reted had them deleted with is philangial diahrrea. |
AF61R specs as follows:
t-4 flange modular center/backwall .313 dia. shaft compressor has 4" inlet x 3" outlet 1.0 divided turbine w/4" outlet small "Q" trim turbine 76mm x 68mm compressor is 61mm x 84mm rated 82% @ 18psi 64#/min. $750 ( V-band and flange are sold seperatly for 55.00 ) I'm also looking to get this turbo asap but have a few questions for the supplier. Anyway to get hold of him directly or some other way than pm'ing D-R Autosports? |
PM D-R Autosports and ask his phone #
|
ask for Ronald. 618-222-1201.
|
All times are GMT -5. The time now is 06:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands