829 whp on 30 psi!
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 419
Likes: 1
From: Sundbyberg,Sweden
829 whp on 30 psi!
Friend Robins new engine set up turned out very well on the Dynocom rollling road last week. With pump E85 and 9700 rpm@30 psi printout read 829 whp
This is with a REW block stage 2 streetport and beweled rotors with a 27 mm semi PP port. Torque 655Nm@8100 rpm. Large BW 480 with 1.32 hotside is used. Low EGT temp of 770 celsius thanks to Snow water injection. Also to mention is Autronic SM-4 with MSD didgital 6 and MSD HVC 60kv coils for leading. Hopefully he will test the RX-7 FD on the dragstrip later in August. Gusfd3s has a tread on 3rd gen time slips and dyno section also.
/Lasse
This is with a REW block stage 2 streetport and beweled rotors with a 27 mm semi PP port. Torque 655Nm@8100 rpm. Large BW 480 with 1.32 hotside is used. Low EGT temp of 770 celsius thanks to Snow water injection. Also to mention is Autronic SM-4 with MSD didgital 6 and MSD HVC 60kv coils for leading. Hopefully he will test the RX-7 FD on the dragstrip later in August. Gusfd3s has a tread on 3rd gen time slips and dyno section also./Lasse
E85 Addict
Joined: Jun 2007
Posts: 519
Likes: 2
From: Stockholm
you can find pictures and specs here https://www.rx7club.com/time-slips-d...weden-1043072/
Trending Topics
Amazing numbers and great fabrication, slow clap....
How much water/water-meth are running? Timing? Sorry for the questions, but those are just incredible numbers for what looks to be a street car.
How much water/water-meth are running? Timing? Sorry for the questions, but those are just incredible numbers for what looks to be a street car.
Snail-Turbo *)
Joined: Jan 2003
Posts: 123
Likes: 0
From: Sweden
No meth only water, it's the snow inj system. The car sounds like an mc without exhaust. ;-)
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 419
Likes: 1
From: Sundbyberg,Sweden
Robin plans to take the motor apart after he has testing it on the 1/4 mile. Then the 8:5 rotors shall be faced clearanced by gusfd3s
We shall test some start technics on the street later today and test 2 step and maybe launch control if that needs
10.5x26x16 slicks is used, but we must do "insane" burnouts to make them sticky
/Lasse
We shall test some start technics on the street later today and test 2 step and maybe launch control if that needs 10.5x26x16 slicks is used, but we must do "insane" burnouts to make them sticky/Lasse
