60-1 w/ a small NPR?
#1
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2001
Location: Altadena, CA
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
60-1 w/ a small NPR?
Hey,
I was wondering if a 60-1 turbo will work well with a small Isuzu NPR IC, or is the IC too small for something like that? The end goal is about 375 rwhp @ 14-15 psi of boost, is that achievable with this combination?
thanks,!
Manolis
I was wondering if a 60-1 turbo will work well with a small Isuzu NPR IC, or is the IC too small for something like that? The end goal is about 375 rwhp @ 14-15 psi of boost, is that achievable with this combination?
thanks,!
Manolis
#2
It sounds to me like you should be able to attain that with proper tuning. Don't quote me though, I am not THAT familiar with those size of turbos.
That Isuzu IC is one of those large truck intercoolers right? If so, it should be big enough as long as it flows good and doesn't have a large pressure drop.
Again, wait for replys from people who have this turbo before deciding.
That Isuzu IC is one of those large truck intercoolers right? If so, it should be big enough as long as it flows good and doesn't have a large pressure drop.
Again, wait for replys from people who have this turbo before deciding.
#3
I can has a Hemi? Yes...
iTrader: (2)
Re: 60-1 w/ a small NPR?
Originally posted by piston eater
Hey,
I was wondering if a 60-1 turbo will work well with a small Isuzu NPR IC, or is the IC too small for something like that? The end goal is about 375 rwhp @ 14-15 psi of boost, is that achievable with this combination?
thanks,!
Manolis
Hey,
I was wondering if a 60-1 turbo will work well with a small Isuzu NPR IC, or is the IC too small for something like that? The end goal is about 375 rwhp @ 14-15 psi of boost, is that achievable with this combination?
thanks,!
Manolis
Thread
Thread Starter
Forum
Replies
Last Post
Red-Dragon_Akuma
New Member RX-7 Technical
11
09-28-15 06:09 AM