Single Turbo RX-7's Questions about all aspects of single turbo setups.

500rwhp fuel set-up

Thread Tools
 
Search this Thread
 
Old May 16, 2007 | 09:15 PM
  #51  
Candy3s's Avatar
Thread Starter
covered in dust
Tenured Member 10 Years
iTrader: (1)
 
Joined: Apr 2005
Posts: 451
Likes: 0
From: new mexico
Anyone heard of the a1000 being mounted in tank?
Reply
Old May 16, 2007 | 11:53 PM
  #52  
crispeed's Avatar
'Tuna'
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Originally Posted by Candy3s
Anyone heard of the a1000 being mounted in tank?
I know of one person that did it. It worked according to the person without any problems. Sure should have made a difference in the noise department.
Reply
Old May 17, 2007 | 01:09 AM
  #53  
sub9lulu's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (7)
 
Joined: Jun 2003
Posts: 2,739
Likes: 2
From: FL
Originally Posted by Candy3s
Where can i find a surge tank? I know rotary extreme used to make one, but i don't know who to find one from now. I would like something I can mount under the car so I dont have to have a fuel cell inside the car.
http://www.more-japan.com/product.ph...cat=544&page=1

http://www.tweakit.net/shop/product_...dcdee48bf89897
not sure if the 2nd link ships to the US tho
Reply
Old May 17, 2007 | 08:07 PM
  #54  
Candy3s's Avatar
Thread Starter
covered in dust
Tenured Member 10 Years
iTrader: (1)
 
Joined: Apr 2005
Posts: 451
Likes: 0
From: new mexico
Originally Posted by sub9lulu
Thanks, I really appreciate it. Im really interested in mounting an a1000 in tank now.. but may fall back on running a surge tank and external pump.
-candice
Reply
Old May 20, 2007 | 04:34 PM
  #55  
Kaotic Dan's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Oct 2002
Posts: 290
Likes: 0
From: NM
The Aeromotive should be fine what you need Candy. I hate to be a spoiler but bieng at 5200ft altitude you are most likely going to be shooting for quite a bit less than 500rwhp SAE with the GT35/40 and the 400-450rwhp you are likely to see is well within the range of the A1000's flow capabilities. I wish you the best of luck and hope to go for a ride when you get it goin.
Reply
Old May 20, 2007 | 05:05 PM
  #56  
k_flip1's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 26
Likes: 0
From: Yokohama, Japan
I was running 518ps with the following set-up:

4 900cc Injectors
Sard 250lph in tank pump
Sard surge tank with another 250lph pump
Modified stock fuel rails
Sard regulator
Sard high pressure fuel line

It was kind of pricey but in the four years I had the set-up I never had a single problem. The guy who bought the set-up off of me has been running it for about a year now and still no problems. I personally think Sard make the best stuff on the market.
Reply
Old May 21, 2007 | 02:20 AM
  #57  
sub9lulu's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (7)
 
Joined: Jun 2003
Posts: 2,739
Likes: 2
From: FL
Originally Posted by Candy3s
Thanks, I really appreciate it. Im really interested in mounting an a1000 in tank now.. but may fall back on running a surge tank and external pump.
-candice
i'd seriously just run a supra pump in tank and pump that to the surge tank, then a bosch 044 / pump of your choice to pump the surge tank

remember ALWAYS use the pump that flows more in the surge tank
if you use the better pump in stock tank the extra fuel is only going right back to the stock tank
Reply
Old May 21, 2007 | 03:14 AM
  #58  
sub9lulu's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (7)
 
Joined: Jun 2003
Posts: 2,739
Likes: 2
From: FL
found u a thread

https://www.rx7club.com/race-car-tech-103/fuel-starvation-3rd-gen-solutions-621927/
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
bryancmatthews
Power FC Forum
14
Oct 5, 2015 08:49 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM




All times are GMT -5. The time now is 05:14 AM.