500 rwhp goal: Which turbo???
02-15-02, 03:24 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Memphis, TN
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
500 rwhp goal: Which turbo???
Hey fellas, I'm planning to go single turbo on my '93 this year. Basically I want a daily-driver with 475-500 (ish) rwhp. @ 22+ PSI. My question is which turbo setup should I go with?? I've seriously been looking at the GReddy T-78 kit, but I'm also considering doing something custom like a KKK or a Garrett Ball Bearing GT Series setup. What do you guys think??? Remember, it's daily-driven, so spool up should be reasonable. I know it'll lag, but I don't feel like counting seconds for my car to get power 
Thanks in advanced!
-Pete
Thanks in advanced!-Pete
02-15-02, 03:41 PM
#2
rotary sensei
iTrader: (5)
Join Date: Mar 2001
Location: Virginia
Posts: 2,312
Likes: 0
Received 0 Likes
on
0 Posts
The T-78 will make that power at those boost levels with race gas..Last week a friend of mine made 540 rwhp with a T-78 on a streetported motor...It will pull 430-450 all day long on pump gas with correct tunning..
Trending Topics
02-15-02, 10:06 PM
#8
Lurking..................
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by wankawankel
Greddy T88 will do the trick. Just don't get it tuned at KDRotary...
Greddy T88 will do the trick. Just don't get it tuned at KDRotary...
02-16-02, 02:17 AM
#9
dear baby jesus...
Join Date: Mar 2001
Location: WA
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by AJC13B
Get the Garrett GT35/40 and custom make exhaust manifolds etc...
Get the Garrett GT35/40 and custom make exhaust manifolds etc...
Haha, no for real the Garrett GT3540 is a badass unit. I should be getting mine here next week.....Ill post some pics
Yeah, go get bent!!!!
02-16-02, 12:25 PM
#11
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Memphis, TN
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the suggestions guys! How much does the GT3540 go for? I know since it's ball bearing it won't be cheap! I'm looking for the ability to make about 500rwhp on PUMP gas (93 octane). While for daily driving, I'll lower the boost so I'll have about 425-450ish rwhp. I'm also considering a water/alcohol injection unit to come on when I/C output temps reach a certain level. What do you guys think about that? Where would I put a tank to hold the water/alcohol? Thanks again!
-Pete
-Pete
02-16-02, 06:54 PM
#12
Junior Member
Join Date: Aug 2001
Location: Greeley, CO
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
500 RWHP will be quite the task. I blew an apex seal on my 7 at 15 psi on pump gas (at 15 psi I have 401 RWHP). I run a t-78, haltech E6k, ALL the goodies AND it was tuned by Rotory Performance. If you can hit 500 hp on pump gas I want to know how.
02-16-02, 08:34 PM
#14
Passenger
Posts: n/a
[QUOTE]Originally posted by gmonsen
[B]******-wankel: you ought to go to kd rotary and get your brain tuned at about 20 psi. then you'd have more than 80 IQ at the rear lobe and be smart enough to comment.
Why don't you get a job or a life and get off my jock. Your too old to be in the game any way. Everone knows the grocery getting performance(KDRotary) isn't good enough any more...
Makes me wonder what you really know about IQ, you honkey.
[B]******-wankel: you ought to go to kd rotary and get your brain tuned at about 20 psi. then you'd have more than 80 IQ at the rear lobe and be smart enough to comment.
Why don't you get a job or a life and get off my jock. Your too old to be in the game any way. Everone knows the grocery getting performance(KDRotary) isn't good enough any more...
Makes me wonder what you really know about IQ, you honkey.
02-16-02, 08:41 PM
#16
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SPIN HRD
500 RWHP will be quite the task. I blew an apex seal on my 7 at 15 psi on pump gas (at 15 psi I have 401 RWHP). I run a t-78, haltech E6k, ALL the goodies AND it was tuned by Rotory Performance. If you can hit 500 hp on pump gas I want to know how.
500 RWHP will be quite the task. I blew an apex seal on my 7 at 15 psi on pump gas (at 15 psi I have 401 RWHP). I run a t-78, haltech E6k, ALL the goodies AND it was tuned by Rotory Performance. If you can hit 500 hp on pump gas I want to know how.
02-16-02, 10:58 PM
#17
dear baby jesus...
Join Date: Mar 2001
Location: WA
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by zro_piston
Thanks for the suggestions guys! How much does the GT3540 go for?
Thanks for the suggestions guys! How much does the GT3540 go for?
If your serious about the Garrett GT units then give Tim a call. www.rpmperformancecentre.com.au the phone # is on his page.
02-17-02, 12:40 AM
#18
Lurking..................
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by wankawankel
Or don't be another sucker who is stock and running 16's all day at the 1320...
Or don't be another sucker who is stock and running 16's all day at the 1320...
I'm not going to turn this thread into a flame war wankawankel, but yeah my car is "stock" and runs 16's...
Oh and I didn't mention this before but from what I hear I think ErnieT is getting great performance out of his KKK, so either that or the maybe try the HKS turbo they mentioned..
02-17-02, 07:47 AM
#20
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Memphis, TN
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
GotBoostd7, I checked out their site. The price they have listed for the GT 35/40 is $3000! That probably doesn't include shipping. Did you get a hookup price or something? Also, where can I get more info on KKK single setups?? I've heard good things about them. But I remember not long ago Ray Lochead (www.srx7.com) got flamed a bunch at the forum because he had a 500+ rwhp "package" that included a KKK turbo. What do you guys know about KKKs? Can I get them with Ball bearings too? Thanks again!
-Pete
-Pete
02-17-02, 10:30 AM
#21
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Ray didn't get flamed. The information on his website has been updated and is the real deal. My turbo spools faster than the T-78 and has the same or better top end. This spring when I blow 10's sec. right by, you be the judge. I was running around 13psi when I went 11.22..........Imagine when Im tuned w/ the Haltech instead of the POS Power fc running 17-18psi.........
02-17-02, 12:05 PM
#22
Photo Diety
Join Date: Mar 2001
Location: Florida
Posts: 2,311
Likes: 0
Received 0 Likes
on
0 Posts
zro_piston, that was probably in $AU. The conversion rate is pretty decent. Just do a search for exchange rate on yahoo or something to get the current rate. So Garrett is now releasing their "full" ball bearing turbos (not one bb and a plain bearing on the other side, but at both ends) to the public outside of HKS? What sort of manifold is needed to run it? I know FEED has one ($$$) but do any of the HKS units have the appropriate flange?
Michel
Michel
02-17-02, 12:41 PM
#23
Passenger
Posts: n/a
Originally posted by ErnieT
Ray didn't get flamed. The information on his website has been updated and is the real deal. My turbo spools faster than the T-78 and has the same or better top end. This spring when I blow 10's sec. right by, you be the judge. I was running around 13psi when I went 11.22..........Imagine when Im tuned w/ the Haltech instead of the POS Power fc running 17-18psi.........
Ray didn't get flamed. The information on his website has been updated and is the real deal. My turbo spools faster than the T-78 and has the same or better top end. This spring when I blow 10's sec. right by, you be the judge. I was running around 13psi when I went 11.22..........Imagine when Im tuned w/ the Haltech instead of the POS Power fc running 17-18psi.........
02-17-02, 12:57 PM
#24
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Memphis, TN
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Those KKK units are expensive! Ernie, do you have the stage 1 or 2?? That sounds awesome! But is it okay for daily driving for around 425-450hp? How much power does your setup make anyway? That Garrett GT 35/40 setup sounds really nice too. What information do you guys have about that? Also, who can custom make me a manifold and downpipe? Thanks for all the help guys!
-Pete
-Pete
Last edited by zro_piston; 02-17-02 at 01:01 PM.
02-17-02, 02:50 PM
#25
dear baby jesus...
Join Date: Mar 2001
Location: WA
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
Haha, zro_piston...yeah that $3000 is in Australian dollars man! You think the Aussies are gonna list prices in USD? As of this mornings exchange rate, the turbo, including shipping to Auburn (near Seattle) WA cost $1751 George Washington's. And these are the newest Garrett GT series units. Full ball bearing on the hot and cold side.
As for the manifold it uses a 4-bolt flange.
As for the manifold it uses a 4-bolt flange.