3bar map sensor
#1
3bar map sensor
I purchased the 3bar map sensor plug and play from banzai. When I plugged everything in and started the car, my boost display on the power fc wasn't registering anything just the lines like nothing was plugged in for that sensor (I switched back to stock map sensor right now). My question is do I need to callibrate the power fc before I can use it as plug and play? I'm getting tuned on the 19th, but I was just curious what was the deal? All imput would be greatly appreciated.
#3
Here is the problem I had with my Map Sensor. http://www.2carpros.com/makes/honda/civic.htm connection issues cause a lot of problems. Hope this helps!!
#4
GorillaRaceEngineering.co
iTrader: (1)
Here is the problem I had with my Map Sensor. http://www.2carpros.com/makes/honda/civic.htm connection issues cause a lot of problems. Hope this helps!!
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM