2nd gen leading coil used in a FD (with single t mods)
08-12-03, 09:10 AM
#1
Racerxrx7
Thread Starter
Join Date: Mar 2002
Location: Orlando, FL
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
2nd gen leading coil used in a FD (with single t mods)
I've been having what I believe to be ignition problems.
My car is running really rough, rich, hard to start. I checked the compression to see if the engine was okay, it seemed fine, put new wires, spark plugs. Nothing seemed to work. I checked the spark and it was very faint. It was like a human hair firing. I bought two new coils for the trailing (MSD SS 8207). I also bought a MSD 6A for the Leading. For some reason the MSD 6A didn't work. I sent it back and their sending a new one. I found a second gen leading coil with igniter, I heard these are a little better than the third gens. Has anybody swapped this coil for the 3rd gens? Let me know if you think this is alright.
Thanks
My car is running really rough, rich, hard to start. I checked the compression to see if the engine was okay, it seemed fine, put new wires, spark plugs. Nothing seemed to work. I checked the spark and it was very faint. It was like a human hair firing. I bought two new coils for the trailing (MSD SS 8207). I also bought a MSD 6A for the Leading. For some reason the MSD 6A didn't work. I sent it back and their sending a new one. I found a second gen leading coil with igniter, I heard these are a little better than the third gens. Has anybody swapped this coil for the 3rd gens? Let me know if you think this is alright.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
stickmantijuana
MoTeC
5
09-10-15 07:58 PM
