Thanks for the info, I'll get more picture tomorrow and do the spark check.

 

On the engine harness the colors are:
Black green green/yellow blue white black/red yellow
Orange yellow/orange mint yello/white brown/yellow
On the extension the black/red changes to black/yellow and the others match up
The black/yellow wire is spliced into and runs into the blue harness extension

 

As soon as I posted that I found where it pluged into. As far as 12v on the coil wires I'm not getting that. I checked the main harness and it seems I'm getting less than 1v there.

 

Good to hear you sorted the plug issue. Sounds like you now have some time to spend on the wiring diagrams to track and trace the coil power issue.

All the best, Rusty

 

Bought an titanium exhaust the other day, cat, midpipe and catback thinking I got a nice exhaust. When I tried to install it it didn't fit. Now I have an exhaust I don't know what it goes to.

 

Any idea on the type? What doesn't fit?

 

I have no clue, I was maybe thinking a Cosmo since it's from Japan, but it's defiantly not for an fd as stated. It's about a foot too short but the bends are close but still doesn't fit. The guy I bought it from says his friend sends containers and stated it came of a third generation. Someone was missed informed somewhere. The cat maybe but not the rest of the exhaust. He's some other pictures.

 

Out of curiosity, does the hanger move on the muffler? If so, it could just be on the opposite side it's supposed to be on?

 

The hangers move, which is what I first thought of when I looked at the exhaust. What I failed to realize is the direction of the hangers on the muffler. Instead of them facing off to the side they face to the rear (parallel) to the exhaust. The other hanger is good as far as angle but it's about 4in longer than my exhorting one which means it would hang lower.

 

I'll bet that exhaust is off an fc,

I have an fd motor and turbos in my fc and the fd dump pipe is shorter then what was in the fc soo im missing about a foot of exhaust in near a straight line aswell.

Shame its such a nice looking exhaust!

 

Yeah that exhaust was sexy.

I ended up meeting up with the guy and got my money back (after he tried to short me). I wish I could have recorded the nonsense this guy was trying to feed me. That deal made me a bit sour for Craigslist deals for awhile.

 

So this is the crap I'm dealing with, had my car shipped and they damaged it. After 3 months of jumping through hoops I get denied my claim be cause there isn't enough evidence. (Long story short). Looks like I need to take them to court.

This is pick up, you can see there was nothing marked on the door

This is delivery where you can see the driver shaded it in

 

Well it has been awhile since i have updated. I've started rebuilding my third motor but this time I am going for high horsepower. I don't actually have a power goal in mind which has always been my downfall. But i do know what parts that I am wanting to install. Oh and I am doing a single turbo build.

 

pictures got out of order

 

getting closer but still have a lot to do and order











Please excuse my messy garage

 

Garage all cleaned up
Vmount came in thanks to spec.garage. Of course I had to make it my own

 

Interested to see if that paint holds up.

Didnt use floor paint did you

 

I actually did. But it didn't come out how I expected.

 

EFR 9180 1.05 A/R EWG

 

A lot has happened since the last time I posted on here. Just going to add a few pics than details