My love RoX7e
07-12-14, 06:33 PM
#77
On the engine harness the colors are:
Black green green/yellow blue white black/red yellow
Orange yellow/orange mint yello/white brown/yellow
On the extension the black/red changes to black/yellow and the others match up
The black/yellow wire is spliced into and runs into the blue harness extension
Black green green/yellow blue white black/red yellow
Orange yellow/orange mint yello/white brown/yellow
On the extension the black/red changes to black/yellow and the others match up
The black/yellow wire is spliced into and runs into the blue harness extension
07-14-14, 04:14 AM
#79
Full Member
Join Date: Mar 2013
Location: New Zealand
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Good to hear you sorted the plug issue. Sounds like you now have some time to spend on the wiring diagrams to track and trace the coil power issue.
All the best, Rusty
All the best, Rusty
04-05-15, 10:07 PM
#82
I have no clue, I was maybe thinking a Cosmo since it's from Japan, but it's defiantly not for an fd as stated. It's about a foot too short but the bends are close but still doesn't fit. The guy I bought it from says his friend sends containers and stated it came of a third generation. Someone was missed informed somewhere. The cat maybe but not the rest of the exhaust. He's some other pictures.
04-06-15, 07:43 AM
#84
The hangers move, which is what I first thought of when I looked at the exhaust. What I failed to realize is the direction of the hangers on the muffler. Instead of them facing off to the side they face to the rear (parallel) to the exhaust. The other hanger is good as far as angle but it's about 4in longer than my exhorting one which means it would hang lower.
04-06-15, 07:08 PM
#85
I'll bet that exhaust is off an fc,
I have an fd motor and turbos in my fc and the fd dump pipe is shorter then what was in the fc soo im missing about a foot of exhaust in near a straight line aswell.
Shame its such a nice looking exhaust!
I have an fd motor and turbos in my fc and the fd dump pipe is shorter then what was in the fc soo im missing about a foot of exhaust in near a straight line aswell.
Shame its such a nice looking exhaust!
04-06-15, 09:12 PM
#86
I ended up meeting up with the guy and got my money back (after he tried to short me). I wish I could have recorded the nonsense this guy was trying to feed me. That deal made me a bit sour for Craigslist deals for awhile.
Last edited by meetRoX7e; 04-06-15 at 09:24 PM.
05-27-15, 01:26 PM
#87
So this is the crap I'm dealing with, had my car shipped and they damaged it. After 3 months of jumping through hoops I get denied my claim be cause there isn't enough evidence. (Long story short). Looks like I need to take them to court.
This is pick up, you can see there was nothing marked on the door
This is delivery where you can see the driver shaded it in
This is pick up, you can see there was nothing marked on the door
This is delivery where you can see the driver shaded it in
02-19-17, 10:22 AM
#88
Well it has been awhile since i have updated. I've started rebuilding my third motor but this time I am going for high horsepower. I don't actually have a power goal in mind which has always been my downfall. But i do know what parts that I am wanting to install. Oh and I am doing a single turbo build.
