hey I just took my car apart to do some upgrades... I noticed one weird thing.

I have Turbosmart 60mm Power Gate WG60 wastegate. Like every other wastegate, it has the sprung plunger that closes the wastegate opening. I noticed that there is a significant gap (2mm or so) around the plunger. This would make exhaust constantly leak into the dump tube from the uppipe. Is this supposed to be closed completely? or is a small gap normal? Thank you.

 

Can you post of pic?

 

You should have a valve seat that slides in

 

nice. thanks man. yes you're right! the valve seat was stuck on the other side of the v-band when I took the WG off. now everything looks normal. thanks again.