6pot front 380mm rotor 34mm thickness CCM disc
custom bell hat hub and bracket

 

Are you trying to slow down after landing?

 

yeap

 

I got the intercooler installed over the weekend. Picked up an alloy radiator yesterday which ill throw in over the weekend.





Modified manifold MK2..
I will test fit it tonight, and if the wastegates don't hit then it can be welded up and we can proceed

 

I replaced my Pettit ecu with an apexi. Got rid of the ugly air pump and installed the Pineapple racing pulley kit.

 

I used foam to fill in the holes around the battery box and AC Condensor so now all air are going to the intercooler and airbox!
Made a huge improvement at speed.

 

started the car to warm it up and taken a pic which have been 14years seating

 

Shoot us with pictures when you have your CC brakes installed. And it is giant being 380mm - minimum 18 or 19 inches rims?

 

Need 19" and up to use the brake.
I have test fit it on the car and then take it off because the car not ready yet.
It will get dusty and dirty if I leave it on the wheel hub.

 

Spun the engine on the stand to install Garfinkle oil pan brace. Realized there was still some coolant in there. whoops.

 

You're gonna like that brace.

 

Productive weekend... Installed new FR and RR speakers, dash, door panels, rear bins, rear panels, center console, headliner, visors, dome light, seats and new steering wheel.

 

^ That look pretty cool, the steering wheel will go perfect with that interior

 

Finishing up some weird stuff

 

^^^ gonna be warm in there

 

Those look pretty cool. Where did you find those

 

China, search [ ALIEXPRESS ] just type in Mazda

 

Yesterday actually, repainted front fenders and bumper.

 

Today, I drove my CYM to work

 

I drove mine to work today as well. (Not a CYM but a BB)

 

Saw a photo on this forum of the new rx7 fd feed gt3 front guards with rx8 indicators, i liked the look and purchased a set of indicators on put them on.

 

THREAD REVIVAL!!

I saw a similar thread in the FB section which made me go digging for this one so I wouldn't have to start a new one .
And as soon as I get home from work, I'm gna sit in my garage, crack open as brew, and just admire the beauty she is (while I wait for my cluster to get worked by Mike in Canada)!

What about you guys? What did you do to your FD today?

 

Walked right past it to fix the FB, and our dying furnace. Hopefully will have something more substantial soon, still collecting parts.

 

I picked up a spare hatch with some items I’ve always wanted to try..

 

What all do you need? I have a bunch of random parts laying around my garage and spare bedroom that could use a good home.