^LOL. This is a damn good looking diffuser too. I might have to swap to this one. LOL

 

oh no you won't

 

i want a cf twill

 

wow, i'm suprised crispy hasn't bumped this thread in a while! anyone talked to ken lately about our diffuser?

 

Oh I'm here...don't you worry!
I've been a little distracted recently.
I'll give Ken a call tomorrow.....if I remember.
Crispy

 

I want in on the diffuser...can i join? ...ready to pay.

 

Hey guys,

The mold is already done or at least partially done. What i mean is we can produce CF parts from this mold, however, in order to do it the way I want to save cost, I will be needing to add more to the mold.

We can still produce this using the older technique since the mold/tooling is not fully complete. However, the cost of the diffuser will remain at $675... same as initial price because of the difficulty.

I know some of you want this right now, so Im offering the next 2-5 of them for $675 for those in a rush.

If we complete the tooling the way we want, I believe I can offer this diffuser for about $575. If the tooling is designed carefully with minimal errors, production difficulty should be cut a bit, which is why i can offer it for $575.

If you need this right now, I can only do it the old way and the cost will be $675 + shipping. If you don't want to wait, let me know. I know some of you want this for 7 stock.

Ken

 

Pardon for the question, since I assume it was answered before... but will this diffuser be available in NON CARBON FIBER format?

 

diffuser is readily available in FRP

 

Hey Ken, thanks for the update. So how long will it take you to make the additional tooling? I believe I can wait for the new tooling and reduced price of $575 however if the additional tooling means waiting another 6 months.....maybe not. And I'm sure others might want to know also.

I'm sooooo temped to pop for it right now!

TIA
Crispy

 

oooo what good news! And where would I get one of these? Replica I hope. I don't have the cash for a real one. lol

 

hey ibanez, ken sells these frp versions you are looking for. search in this vender thread or simply contact him via pm or phone.

hey ken, i would like to now like crispy how long would it take for the new tooling to be complete as well. if it takes a couple months then i will purchase one of these bad boys in twill weave next friday.

thanks, mark

p.s. maybe feed hood to!

 

+1 for how long tooling will take

 

any news on how long it would take to get the 575 diffuser price?

 

please excuse my ignorance if this has been asked already but is there any wind tunnel testing done on the original model that is being reproduced. Im just not sure wether this is going to reduce drag or just add more drag. it seems like this has the ability to go in either direction. thanks

 

^ I would lean more towards this being functional given it's an RE part. I doubt RE would produce this part solely for "the look." It's just not an RE philosophy...IMHO.

And I guess a bump for this old and moldy thread...C'MON KEN!

Crispy

 

Crispy, you sure about that?

http://www.re-amemiya.co.jp/commodit...a498&scd=10060

 

LOL yeah ok so yes they do make a BIG caliper cover and carbon *look* windshield wiper covers but a non-functional...counterfunctional rear diffuser? C'mon!

Crispy

 

I'm just messin with ya...I want one too lol

 

<shakes head> I can't believe RE-A sells fake BBK caliper covers! I feel so confused...

Crispy

 

picked up an frp one and it damn looks sexy. thanks ken for the help! loving the feed side skirts as well. the body shop had no problems painting and installing them. hah now if u just made a 99 spec plateless front bumper id b the first on the list =D

 

Hey guys. Good news! these are back on board . $575 is the new price.

I currently have one twill weave in stock. We ran out of carbon... should be getting some tomorrow.

So where is that list again?

Ken

 

GET OUT!!!!!

For real, is this going to happen? I am so excited. Ken, do you want payment now? I am signed up for twill weave, but I know there were many others on the list before me wanting one.

1) thewird - CF : Twill Weave
2) PortedRotorTuner - CF:
3) eightsixlife - CF:
4) calicos - CF: Twill Weave
5) CrispyRX7 - CF: Plain Weave
6) *RX007* - CF:
7) 510_rx7 - CF : Twill Weave
8) FyVe - CF:
9) MrsJoff - CF: Twill Weave 100% in, will send payment when needed.
10) MazdaGuy42 - CF: Plain Weave
11) Dusted RX - CF: Plain Weave
12) Coolant_Leak - CF: Plain Weave
13) JEROME- Twill Weave
14) theRJpackage: Twill Weave
15) imtiaz : CF- twill weave
16) MisterPiranha: CF - plain weave
17) talkstometal: CF - needs to specify plain or twill weave?
18) 93vrfd houston: CF - twill weave
19) 7tuned: CF- plain weave
20) Et3rNaL: CF - plain weave

 

GTFO! Ken I'd thrown in the towel considering you'd told me you'd have something ready in JUNE!

FINALLY!

#5 plain weave right here...I"M READY!!!

Regards,
Crispy

 

1) thewird - CF : Twill Weave
2) PortedRotorTuner - CF:
3) eightsixlife - CF:
4) calicos - CF: Twill Weave
5) CrispyRX7 - CF: Plain Weave
6) *RX007* - CF:
7) 510_rx7 - CF : Twill Weave
8) FyVe - CF:
9) MrsJoff - CF: Twill Weave 100% in, will send payment when needed.
10) MazdaGuy42 - CF: Plain Weave
11) Dusted RX - CF: Plain Weave
12) Coolant_Leak - CF: Plain Weave
13) JEROME- Twill Weave
14) theRJpackage: Twill Weave
15) imtiaz : CF- twill weave
16) MisterPiranha: CF - plain weave
17) talkstometal: CF - plain weave
18) 93vrfd houston: CF - twill weave
19) 7tuned: CF- plain weave
20) Et3rNaL: CF - plain weave