FD3S: Sanai type Front Fenders... Any Interest?
03-02-10, 11:55 PM
#127
Make an assessment...
iTrader: (3)
^He hasn't gotten back to me for a couple weeks now either, he's probably just busy or something. I hope that's it anyway haha. I have some issues I'm trying to straighten out.
07-23-10, 01:18 AM
#137
Make an assessment...
iTrader: (3)
Sorry guys, I'm deployed right now and can't take any pics, but haven't really done anything with them since my last post anyway. I had an issue with one of the fenders that Ken is taking care of for me. Hopefully I'll have a replacement by the time I get home in Sept and get my new wheels and tires put on with these!
11-28-10, 09:36 AM
#138
Back from the dead with a question:
If these are 20mm wider on each side (about 1/2"), that's about the width of the inner lip. Normally with factory fenders, you roll the lip under for clearance, but you can't do that with composite... so, with an unrolled lip, are you actually gaining any clearance for when you turn the wheel?
If these are 20mm wider on each side (about 1/2"), that's about the width of the inner lip. Normally with factory fenders, you roll the lip under for clearance, but you can't do that with composite... so, with an unrolled lip, are you actually gaining any clearance for when you turn the wheel?
03-03-11, 01:41 PM
#140
Back from the dead with a question:
If these are 20mm wider on each side (about 1/2"), that's about the width of the inner lip. Normally with factory fenders, you roll the lip under for clearance, but you can't do that with composite... so, with an unrolled lip, are you actually gaining any clearance for when you turn the wheel?
If these are 20mm wider on each side (about 1/2"), that's about the width of the inner lip. Normally with factory fenders, you roll the lip under for clearance, but you can't do that with composite... so, with an unrolled lip, are you actually gaining any clearance for when you turn the wheel?
me and my boss just ordered a whole bunch of stuff from you shine!! im just waiting on you to say these are ready to go!!
im dying to get them!!!!
08-10-11, 09:58 PM
#143
11-04-11, 02:19 AM
#144
Both sides are one. They look just look just like stock from the side. They are 20mm wider than stock from the "outside." These are just 5mm less wide than the feed front fenders. From the front profile, they look almost the same, which gives the car an updated and aggressive look without distorting the classic lines of the FD
.
11-04-11, 02:25 AM
#145
$450 + $150 shipping. 2 pairs in stock ready to go. Unfortunately, I never got these painted and installed. These are the only installed pics I have. I lost a few pics from a computer problem.
If you are looking for a slightly aggressive stock look , these are it. We chose 20mm over 25mm to compliment the oem rear quarter without modification.
If you are looking for a slightly aggressive stock look , these are it. We chose 20mm over 25mm to compliment the oem rear quarter without modification.
02-07-12, 02:45 AM
#148
Make an assessment...
iTrader: (3)
I keep forgetting to post more pics of these.
Here are some pics with the Shine 20mm+ front fenders. Wheels are 18x9.5 +22 and the tires are 255/35. I don't have these fenders on anymore, but they fit great. I just decided to go a different direction.
Here are some pics with the Shine 20mm+ front fenders. Wheels are 18x9.5 +22 and the tires are 255/35. I don't have these fenders on anymore, but they fit great. I just decided to go a different direction.
02-13-12, 11:04 AM
#150
Full Member
Join Date: Jan 2011
Location: Rotary heaven
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Speed Junkie do Shine still sell these? Have had no response form them?
I can't see it on their website and tried calling but to no avail...
Anywhere else where I can get these from?
I can't see it on their website and tried calling but to no avail...
Anywhere else where I can get these from?