|
Originally Posted by Dorifto7
(Post 10439490)
Wanted to post a couple pics with the burnout kit I got. Got the fenders, bumper, sides. Everything but the rear bumper. Also added the CF fender vents and low profile wing that I got from Ken as well. Going to pick up a diffuser from you in a couple weeks as soon as I can decide on the Sanai or Pro... Thanks!
Wheel Specs: Rear: 19/10.5/+22 Front: 19/9.5/+22 Tires: Rear: 275/35/19 Front: 235/35/19 Thanks for the advise on the wheels Ken. They were pretty much spot on. Should have probably gone a little more stretched on the rear so I can drop a little more. But I'm pretty happy with the way it sits now. |
Originally Posted by dhahlen
(Post 6833984)
for all of those too lazy to link
http://img.photobucket.com/albums/v7...7022007453.jpg http://img.photobucket.com/albums/v7...7022007454.jpg http://img.photobucket.com/albums/v7...7022007452.jpg http://img.photobucket.com/albums/v7...7022007451.jpg http://img.photobucket.com/albums/v7...7022007448.jpg |
Originally Posted by Montegorx71992
(Post 10458619)
What paint is this? Anyone know? Please pm me it maybe a paint code too
I want to go 19" with my Burnrout fenders, but I don't want them sticking out too far. I don't want to have to go with a slimmer tire, and have it be stretched. I wanna run 245's on the front, and 285-295's on some 18X10 or 19X9.5/19X10's for the rear. It looks like I need to go closer to +25 or higher offset, for them to be a little more tucked in.. |
Has anyone gone bigger than 285/18's all four corners with this kit? I know you can do 285's on stock body.....
|
Originally Posted by wtfx100
(Post 10511787)
Has anyone gone bigger than 285/18's all four corners with this kit? I know you can do 285's on stock body.....
I would think a 255 or 265 would be the largest tire you'd want to run on the front... |
Originally Posted by wtfx100
(Post 10511787)
Has anyone gone bigger than 285/18's all four corners with this kit? I know you can do 285's on stock body.....
|
Originally Posted by YoshiFC3S
(Post 10511609)
I'm more interested in the offset of those rims.
I want to go 19" with my Burnrout fenders, but I don't want them sticking out too far. I don't want to have to go with a slimmer tire, and have it be stretched. I wanna run 245's on the front, and 285-295's on some 18X10 or 19X9.5/19X10's for the rear. It looks like I need to go closer to +25 or higher offset, for them to be a little more tucked in.. https://i38.photobucket.com/albums/e...%207/photo.jpg |
Originally Posted by KaoticFdR1
(Post 10523785)
-wes |
you could fly me out so I can take pictures for you...
|
I'm having the wheels P/C'd a different color at the moment and getting the front and rear bumpers fixed.....if the rear bumper (got smacked while it was parked by a fork lift) is done for I'm prolly going back to stock and adding a rear diffuser
|
how much for shipping for the whole kit to Limoges, Ontario, Canada K0A 2M0
|
Very nice car. What kind of wheels are those? Looks like either TE37s or the Varrstoen ES 2.2.2s.
Originally Posted by Dorifto7
(Post 10439490)
Wanted to post a couple pics with the burnout kit I got. Got the fenders, bumper, sides. Everything but the rear bumper. Also added the CF fender vents and low profile wing that I got from Ken as well. Going to pick up a diffuser from you in a couple weeks as soon as I can decide on the Sanai or Pro... Thanks!
Wheel Specs: Rear: 19/10.5/+22 Front: 19/9.5/+22 Tires: Rear: 275/35/19 Front: 235/35/19 Thanks for the advise on the wheels Ken. They were pretty much spot on. Should have probably gone a little more stretched on the rear so I can drop a little more. But I'm pretty happy with the way it sits now. |
Originally Posted by shineautoproject
(Post 10246494)
Hey Guys,
I took a few pictures of an Rx7 with our fenders built in. Molding on the rear fenders is probably the hardest part of putting on this particular kit. Not every shop does it the same way either. I don't think I've seen a car do it the same way the original Burnout car has it. In the original Burnout Rx7, you can see a crease in the rear flare. More distinction. Most of what I've seen has been more of a blend to the curvature of the FD rear quarters. http://img829.imageshack.us/img829/7...024x683.th.jpg http://img718.imageshack.us/img718/5...024x683.th.jpg http://img580.imageshack.us/img580/8...024x683.th.jpg http://img842.imageshack.us/img842/9...024x683.th.jpg http://img269.imageshack.us/img269/4...024x683.th.jpg http://img228.imageshack.us/img228/2...024x683.th.jpg http://img28.imageshack.us/img28/939...024x683.th.jpg Wheel Specs: 19 inch SSR MS1 Rear: 19x11 +22 275/30/19 Front: 19x9.5 + 18 tire size.. unknown. as you can see.. he still has alot more room for more tire. I know he can go at least 295 in the rear with an 11 inch wide wheel. Enjoy :) Ken |
I have a few questions: Will the 3 Piece Adjustable Front Undertray(FD3S-UND-99) go with this and will I still need a 99 spec brake duct?
|
nice
|
Love this kit...
|
ls1oo7
Spinner * Trader Score: (0) Is anyone running a 19x10 front rim ? The rims I'm getting built are only in 8 or 10 inches wide and all measurements are done in backspace not offset so if anyone knw a the proper offset for a 10" wide front rim please let me knw from a ruff estimate looks like I will be ok with 6" backspace with looks like 19x10 +26 Info needed ASAP ! Thanks !! |
One of the best looking kits out there. Is the kit readily available or are they made to order?
|
Any info on sizing for a 19x10 with a fat 4"+ llip
|
shine ks burnout kit
Originally Posted by shineautoproject
(Post 5884870)
http://img317.imageshack.us/img317/5383/burnout1wd5.jpg
http://img317.imageshack.us/img317/2572/3751653ah3.jpg http://img317.imageshack.us/img317/6186/4913145yy2.jpg http://img317.imageshack.us/img317/2996/5hm1.jpg Pics on white FD3S without Front and Rear Fenders.... http://img317.imageshack.us/img317/1738/iphp3ay4.jpg http://img317.imageshack.us/img317/3901/iphp2nr7.jpg Item No./Description/Price (FD3S-FB-B) Front Aero Bumper $450 (FD3S-SS-B) Sideskirts $350 (FD3S-RB-B) Rear Aero Bumper $400 (FD3S-FFND-B) Front Wide Fenders (20-25mm wide depending on how much of the inner lip is trimmed) $450 per pair. (FD3S-RFND-B) Rear Fender Flares (20-25mm wide) $150 per pair Recommended Products: (FD3S-UND-S) Front Aero Bumper Undertray. May require cutting/trimming depending on style of bumper. FRP $115 Carbon $215 (FD3S-Vents-OEM) Carbon Fiber (Plain or Twill) $100 Useful links to other sites with info: http://shineautoproject.com/forum/up...splay.php?f=21 POST QUALITY FINISHED PRODUCT PICS HERE! http://shineautoproject.com/forum/up...thread.php?t=8 Shipping Info: http://shineautoproject.com/forum/up...splay.php?f=86 Ordering Info: http://shineautoproject.com/forum/up...hread.php?t=40 *PLEASE FEEL FREE TO POST PICS, ASK QUESTIONS, DISCUSS, ETC.... |
Originally Posted by ls1oo7
(Post 10992369)
Any info on sizing for a 19x10 with a fat 4"+ llip
|
Does anyone have pictures of this front bumper and front fenders only? before paint okay.
|
anybody know what the fitment is like on this product? the material doesn't look like fiberglass..
|
Originally Posted by adrenalinejunky
(Post 11032370)
Does anyone have pictures of this front bumper and front fenders only? before paint okay.
|
Originally Posted by Airwolf RX7
(Post 11093139)
anybody know what the fitment is like on this product? the material doesn't look like fiberglass..
|
| All times are GMT -5. The time now is 12:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands