Steve Kan tuning in Spartanburg South Carolina on 6/9-6/10
#129
Well, just an update: the Intake is in, still waiting on the elbow and changing the plugs and installing new fuel pump tonight. Finishing up some lose ends tonight such as adding fuilds (PSP Oil, Coolant) and continue to wait on parts. Elbow and pullies should be in on Thursday / Friday as is the battery.
#131
Junior Member
Thread Starter
iTrader: (34)
Join Date: Nov 2004
Location: AZ
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Well, just an update: the Intake is in, still waiting on the elbow and changing the plugs and installing new fuel pump tonight. Finishing up some lose ends tonight such as adding fuilds (PSP Oil, Coolant) and continue to wait on parts. Elbow and pullies should be in on Thursday / Friday as is the battery.
#133
Junior Member
Thread Starter
iTrader: (34)
Join Date: Nov 2004
Location: AZ
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
yeah, bigger pump and injectors. the ecu still thinks that it has the small stuff, so it will inject the same amount of fuel. but if your smaller injectors and pump were working hard (which i think they were), then it will still make the new ones do the same. the only difference is when the new ones are working hard they are dumping in alot more fuel.
if any of that made sense, cool!! i dont know how, but i know through the commander you can take fuel out accross the board in percentage form. so i guess just calculate the percent increase of the new injectors and then take that much out.
if any of that made sense, cool!! i dont know how, but i know through the commander you can take fuel out accross the board in percentage form. so i guess just calculate the percent increase of the new injectors and then take that much out.
#135
Registered A$$hole
Join Date: Feb 2004
Location: S-ville, SC now to PHX, AZ
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
I just want it to be Saturday already!! Where should I stay if I drive up on Friday night?? Any input is gud... well within reason. I don't do trailer parks!!
#139
Junior Member
Thread Starter
iTrader: (34)
Join Date: Nov 2004
Location: AZ
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
here are some directions that may be a little easier than mapquest:
go down or up 26 until you get to exit 21 (hwy29) and get off at the exit towards spartanburg (either a or b i cant ever remember) then go down that road about 1.5-2 miles and it will be on your left. its a small 3 bay shop. if you come to a mitsubishi dealer on your right, you have gone about 500 feet too far. the shop is over the crest of a hill, and very easy to miss.
go down or up 26 until you get to exit 21 (hwy29) and get off at the exit towards spartanburg (either a or b i cant ever remember) then go down that road about 1.5-2 miles and it will be on your left. its a small 3 bay shop. if you come to a mitsubishi dealer on your right, you have gone about 500 feet too far. the shop is over the crest of a hill, and very easy to miss.
#143
Registered A$$hole
Join Date: Feb 2004
Location: S-ville, SC now to PHX, AZ
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts