my new neighbor have an RX7 also, another one for the club, we keep growing....

 

WOW!! Are you trying to blow the engine before you get it tuned?? I know it was hard staying out of boost & not revving it during the breakin period, but sheesh you don't want to take a chance and ruin something before you get tuned.

Sorry, I had to say something.

Holly

 

I have no intentions on putting ANYMORE BREAK-IN miles on this car. I spent a nice amount for almost EVERY upgrade on the engine that I could get, and it came with a 3 year 36,000 mile warranty. My mechanic only wanted 1,000 miles with 1,500 being a good safety. I have put 2,000 on the engine and now it's time for it to perform. I took it back to the mechanic to be tuned and he blessed off on the two programs loaded in the FC, and the wide band reading are good. I also got the upgrades to allow me to spin the engine to 8,000, but thanks for the advice. THESE CARS WERE MEANT TO BE DRIVEN NOT PUTT-PUTTING AROUND TOWN.

 

that's good, i got the car almost stip down waiting on the new parts to be installed

 

I agree with you Mike, I just had not read anywhere that you had gotten any sort of tuning, so I just had to say something in case you were so excited to have your car back together and not tuned. Sorry, I don't know you, just read a few things on here.

Hope to meet you and your 7 sometime.

Holly

 

holly you gonna come down here for the savannah meet sometime??? bring some of the rotor enthusiast from hotlanta with ya...

 

That could be fun some time.

Holly

 

hello.....anyone

 

Back from the beach, and drove the car around last night. Spotted one 93 at Logan’s and the AWD's were having some sort of gathering at the old Media Play parking lot. Did anything happen over the weekend that I might have missed?

 

I'm not sure if anyone has been keeping track of the tune that's planned in Charlotte around the third week of July, but if you need a tune now it the time to start planning for it. I had scheduled a tune with Steve Kan, but I had a water seal let go and I couldn't make it. His next tune date was the end of July, which is way to long for me to wait, plus it's going to be at Pettit down in South Florida. I would rather drive to NC then to FL any day, so I'm joining the Charlotte guys for this tune and Brian says that he has slots open. He will be there all week instead of just Saturday and Sunday. I’ve talked to both guys and I’m willing to see what kind of results I can receive from my tune. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

 

nice, should call me so we can cruse together and race some ricer's, but if you get a chance call me or stop by the house, need to meet my new neighbor......................im doing a bigger port on my engine soon, details latter

 

Well, I'm pretty sure that this will be one of the first weekends that I don't have to visit NC or SC for any reason. I will be taking the dash apart to figure out the tach issue, replacing the stock accordion air filter hoses and finally putting on the 99 spec tail lights; all parts that I have had in the living room for over a month waiting on the car to return.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

 

figures, im heading up to columbia for the SC meet on sat.
but are we still on for the 17th?

 

as far as i can tell we are still on for the third saturday of the month....
hey darth- talk with the guys at the carolina meet and let them know about our meet, that way they will know that they are welcome to partake in our meet as well... thanks

 

did i miss read some where?
i couldn't any time for the day...
it's gone be night right?

 

im not to sure about time, is anyone working? i was thinking around 4-5ish, hang out for a dinner session then head out to the streets. i cant wait till the 17th, its killing me, just found out i gotta work this weekend so im gonna miss the sc meet.

 

Well, i pull the engine of my car last night , my reear oil seal was leaking, i was bored and i whant a rebuilt anyway, if anybody is interested, my new neighbor was working with Atkuns Rotary for a while, he is the one that rebuilt, port, install and do everithing you whant on the engine, also work on the side in Hinesville shop, is in the ARMY with me so work on the free time, good work on overlaps, porting, street port, all, he is the one helping me today and this weekend finish my engine, let me know he whant some work
The car should be up and running this week, the parts are here, body kit, still waiting on a couple of parts but no biggy, here are some pics of last night, i will post some more today

 

Francisco; how are you so Lucky?

Where was your neighbor about a month ago before I had to rebuild. Well it's done now and I'm riding. I will be by TODAY; I have to go to NAPA by Sams Club for some Scratch remover. First I have to cut some grass and drop by the Yamaha dealer for a master link for my chain (it just disappeared some how). Look for me around 3.00pm<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

Later
Michael<o:p></o:p>

 

ill be here with engine apart, LOL

 

i want to meet your neighbor! gots lotsa questions about the SA my friends and i are building. will he be coming to the meet?
or any free time until then?
i left a post on the SC thread about our meet, a couple of the guys from Chas are in, not sure about upstate people though.
Laters Ian

 

he build gengines for a reasonable price with Atkins parts, all depend what he does to the engine, mine has a street port and we will check to make sure is good and replace the seals for atkings once and all the gaskets, i order my stuff yesterday afternoon from Kathy at atkins and should be here today, not bad ahh

 

more parts arrived today.......Lights and new FEED bumper

 

MIchael here are some pics from last night

 

so is this thread about a meet or parts ? ? ? ?

 

the FD looks sweet! hopefully it will be at the meet!?? So when is the meet going down?