Ortiz Racing 7.64@164
#1
Senior Member
Thread Starter
Join Date: Dec 2004
Location: orlando
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Ortiz Racing 7.64@164
I wanna congratulate Ortiz racing team for running a nice 7.64@only 164 yesterday in moroso, They are now the fastest and quikest rotary In south florida. I know for a fact is gonna run 7.5's because last wensday night it ran a 7.71@173mph at moroso,on the 7.64 pass it only did 164 mph. What if in the 7.64pass it would of ran a 173mph?
Last edited by fbdrifterrx7; 11-06-06 at 06:17 PM.
#2
Originally Posted by fbdrifterrx7
I wanna congratulate Ortiz racing team for running a nice 7.64@only 164 yesterday in moroso, They are now the fastest and quikest rotary In south florida. I know for a fact is gonna run 7.5's because last wensday night it ran a 7.71@173mph at moroso,on the 7.64 pass it only did 164 mph. What if in the 7.64pass it would of ran a 173mph?
Here's the timeslip breakdown.
60ft.......... 1.176
330.......... 3.206
1/8........... 4.909
1/8mph.... 144.53
1000........ 6.386
1/4........... 7.649
1/4mph.... 172.74
Last edited by crispeed; 11-06-06 at 06:26 PM.
Trending Topics
#9
Originally Posted by puntorotary
Its always good to see the rotarys in the states getting faster and faster. Pretty soon there will be another rotary down in florida running mid 7's also.
#12
Senior Member
Thread Starter
Join Date: Dec 2004
Location: orlando
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Yup Papo mazda is the origional owner of the green r100 called "Papo Racing" That used to run pretty good., I know that papo was debuting his new project 2day in bradenton but dont know what it ran yet.
#15
Rotary Mechanic
Well i caught him when hes puttin the car in the trailer,he told me he ran a couple of shake down passes being thats a complete different set-up from what he had,he ran 10.4 placing the gears and half throttle,the car was pulling to the side so he kept on getting off of it.Not bad for his first time back in almost 2 years with a complete different set-up.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 10:46 PM