Need help from Raleigh, NC area rotorheads
#1
Junior Member
Thread Starter
Join Date: Nov 2001
Location: Overland Park, KS
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Need help from Raleigh, NC area rotorheads
I have copied a post that I put on the single turbo section. If there is any one in the Raleigh, NC area or near the Goldsboro, NC area that could come out and help that would be great. I have tried everything that I know of and can't figure out the problem. Send me a pm and maybe we could work out a deal. Any help would be great. Thanks. chris
Here is a copy of the other post:
I finally got around to putting my single kit in and everything was fine until I installed my ecu. I've got a microtech lt8 with the plug and play harness and hand controller. The problem I have is that when I turn the ignition to on to set the hand controller the controller doesn't come on and the ecu and the dash lights flicker and make a weird chirping/buzzing sound. I removed the ecu to check the harness and there was no weird sound/flickering of the lights. Can anyone guess what the problem is. Any help would be great. Thanks.
Here is a copy of the other post:
I finally got around to putting my single kit in and everything was fine until I installed my ecu. I've got a microtech lt8 with the plug and play harness and hand controller. The problem I have is that when I turn the ignition to on to set the hand controller the controller doesn't come on and the ecu and the dash lights flicker and make a weird chirping/buzzing sound. I removed the ecu to check the harness and there was no weird sound/flickering of the lights. Can anyone guess what the problem is. Any help would be great. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post