I77 & I40 Crossroads rotary meet
#9051
PSHH! PSHH! HEAR ME NOW?
iTrader: (3)
What is your problem? If you can't be a positive influance on our group, here's a thought, just stay out. You have only come to our meet once, and you think that your all that. I know what you car will do, you don't have a clue what mine is capable of. Untill you do...........stuff it.
#9052
PSHH! PSHH! HEAR ME NOW?
iTrader: (3)
Sorry about that guys. Anywho, Josh the FC is coming along nicely. I'm sure though that some smart a$$ will find something negative to say.
Speaking of which here's a link to the FSMs and the all the factory specs of the RX7s. THIRD GENS weighed in from the factory without any fluids in them at least 2800 pounds. Now explain to me again how a wide body thrid gen weighs only 2500 pounds with driver, fluids and full interior?
http://foxed.ca/foxed/index.php?page=rx7manual
Again, I repeat. I know what said third gen will do and what it weighs. I also know the person who built it, tuned it, dynoed it, and weighed it..........
Smarta$$.
Speaking of which here's a link to the FSMs and the all the factory specs of the RX7s. THIRD GENS weighed in from the factory without any fluids in them at least 2800 pounds. Now explain to me again how a wide body thrid gen weighs only 2500 pounds with driver, fluids and full interior?
http://foxed.ca/foxed/index.php?page=rx7manual
Again, I repeat. I know what said third gen will do and what it weighs. I also know the person who built it, tuned it, dynoed it, and weighed it..........
Smarta$$.
#9053
Rotary Enthusiast
iTrader: (6)
Ahahahahaha. No one ever said it weighed 2500lbs. Mine weighs in at 2960 with me in it, and I'm 225, do the math. And as far as the meet, it went wrong because you started talking ****. I'm just returning the favor. Your comments were: seen one fd, seen em all.... then u said oh bryan built your motor..... bet that won't last. Then u commented on how big my turbo is and how I would have crazy lag, where in fact many people who rode in my car have said it spools great. Then openly you admit you were hating on my car on this very forum. So sir you lose. Plus I will keep my negative comments to myself once you do the same. Tit for tat is fine with me, or blow for blow is even cooler. You told bryan I talk a lot of ****, well I back it up also.
As far as everyone's else's car, I have no issues with them, never have never will. You just wanna try to gain a mob to be against me, when in fact its your mouth that got u where you at now. So again sir, the ball is in your court. As long as I don't hear any negative comments about myself from you, I wont bother you. And I hope to be at the meet this Sunday.
As far as everyone's else's car, I have no issues with them, never have never will. You just wanna try to gain a mob to be against me, when in fact its your mouth that got u where you at now. So again sir, the ball is in your court. As long as I don't hear any negative comments about myself from you, I wont bother you. And I hope to be at the meet this Sunday.
#9054
Rotary Enthusiast
iTrader: (6)
Oh and I apologize to any other forum members if it may seem I'm talking **** about the whole group. Me and Sam are just poking fun. I love fast cars and most everyone on this forum has a fine example of time, quality, and blood invested in these cars. Sam is a outspoken person like I am, and probably take offense to anything said about his pride and joy, just like I do and most of us on here. :-)
So really I'm just messin, plus he called me a Mexican. Lmao. I had to respond to that. So you guys can ignore me and same rants, cause I'm sure he will always have something smart to say and I will always have a response!and Sam I got the camera charged up when u ready to run em... smile..
So really I'm just messin, plus he called me a Mexican. Lmao. I had to respond to that. So you guys can ignore me and same rants, cause I'm sure he will always have something smart to say and I will always have a response!and Sam I got the camera charged up when u ready to run em... smile..
#9056
PSHH! PSHH! HEAR ME NOW?
iTrader: (3)
First off, we were not the only ones standing there when this conversation happened. Socondly, I didn't talk "****" about your car. I will repeat once again "just stating facts", your car is nice. I have never said any differently. You are running a Bryan special street port that I never said would not last. I can go back to my older post and copy and patse that part if you want. You are running a turbo with over a 100 AR on the hot side which will not hit full spool untill 5k or more. Facts.........nothing more.
What part of this are you not getting? It has nothing to do with your car. IT'S YOU. You are a typical third gen owner who thinks that their car is the fastest thing out there. Not only will my turbo first gen be there Sunday, but so will another. Pound for pound of boost, either one of us will destroy that third gen.
So get this.........don't sing it...........bring it.........
Is that plain enough for you? Conversation over............
What part of this are you not getting? It has nothing to do with your car. IT'S YOU. You are a typical third gen owner who thinks that their car is the fastest thing out there. Not only will my turbo first gen be there Sunday, but so will another. Pound for pound of boost, either one of us will destroy that third gen.
So get this.........don't sing it...........bring it.........
Is that plain enough for you? Conversation over............
#9059
Rotary Enthusiast
iTrader: (6)
My turbo has a .80 rear housing..... fact...
83mm turbine wheel..... fact.
I get boost at 4500.... fact..
Let's run em pound for pound.....
You are the *******... fact.
Everyone says u r the *******... just I'm the only one who will tell u... fact.
Keep em coming loser.
83mm turbine wheel..... fact.
I get boost at 4500.... fact..
Let's run em pound for pound.....
You are the *******... fact.
Everyone says u r the *******... just I'm the only one who will tell u... fact.
Keep em coming loser.
#9061
Enthusiast
iTrader: (5)
I was at that meet and you did come off like you were talking down on Neal's car before you really got to know him, whether you meant to or not is another story.
Regardless, you both have kickass car's that most rx7 owner's dream to have. If we race we race, but, let's not let it get too outta hand and give this club a bad name in Mooresville
Regardless, you both have kickass car's that most rx7 owner's dream to have. If we race we race, but, let's not let it get too outta hand and give this club a bad name in Mooresville
#9065
Rotary Enthusiast
iTrader: (6)
Wastegate spring! 1 bar. 14.7psi on the money. I was getting creep before cause of a bad pressure source. Now its solid. I have been playing with the new eboost2 recently and have gotten up to 17psi. Don't have water injection yet. Got Rotorsports racing dual oil cooler kit and their trailing/control arms on the way..... but no wi... I'm so backwards..
#9066
PSHH! PSHH! HEAR ME NOW?
iTrader: (3)
Anthony, your right. The BS needs to stop. I once again opoligize. It's just funny what lenghts I go to just to get people to come to the meets.
Obviously, Islander doesn't know me. I will pick and probe from time to time. But anyone that KNOWS me, knows that I will go out of my way to help anyone here.
On a good note. Josh and I did some real good tuning on his first gen today. I'll put it this way, we were overpowering the clutch 2nd through 4th. But I will let him say how good it's running now. I know for a fact he will eat me alive once he gets traction in second.
Obviously, Islander doesn't know me. I will pick and probe from time to time. But anyone that KNOWS me, knows that I will go out of my way to help anyone here.
On a good note. Josh and I did some real good tuning on his first gen today. I'll put it this way, we were overpowering the clutch 2nd through 4th. But I will let him say how good it's running now. I know for a fact he will eat me alive once he gets traction in second.
#9069
Rotor or No Motor
iTrader: (4)
Well My car is running GREAT!!!!!!!!!!!! It is breaking the tires loose in 4th
Gear befor it starts sliping the clutch!! Time for a twin plate clutch well here is a vit of a car
that my car runs like. Granted I'm making around 600hp and thats not exaggerating but that was at 18psi. I have it now at14.5.
http://www.youtube.com/watch?v=O-RUL...eature=related
Gear befor it starts sliping the clutch!! Time for a twin plate clutch well here is a vit of a car
that my car runs like. Granted I'm making around 600hp and thats not exaggerating but that was at 18psi. I have it now at14.5.
http://www.youtube.com/watch?v=O-RUL...eature=related
#9070
PSHH! PSHH! HEAR ME NOW?
iTrader: (3)
Hey. The meet will be held at the BK on Williamson RD in Mooresville exit 36 on I-77. We usually try to get together around 1:00pm. Link for directions http://www.mapquest.com/maps?name=Bu...SS&id=43317639
#9075
Zuuuummmmm Zuuuummmmm
Join Date: Oct 2006
Location: King, NC
Posts: 1,450
Likes: 0
Received 0 Likes
on
0 Posts
gah am i gonna have to come up from FL and show yall all up with the stockport 12a and tired *** suspension!!! Sam you and other guy can race but when yall wanna roll with a real car come see me bwahahahahahahahahahahahaha...