EFI 26B 4 rotor engine project (Here we GO!)
#27
under construction
Join Date: Nov 2005
Location: savannah
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
subscribed, weekly update... would love to see some forward progress on this one... a wise old man once told me: if you have the money, you can build anything!!! this looks like somebodies got some deep pockets!!! i love it!!!
#29
Injected with a Poison
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: Miami, FL
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
GSL-SE Plates
Just got these in yesterday from a fellow forum member in west palm. They look to be in really great condition. first step for these will be to send them out to get re-surfaced.
#35
Back at it again!!
iTrader: (3)
Join Date: Jun 2003
Location: Western Colorado
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
Just wondering why you have 4 port and 6 port irons.
Also, I remember reading a while back about the cooling system for a 4-rotor. Basically, it's too long of a travel for the coolant to go into the block and then back out again, as well as mentioning that the coolant is already hot enough mid way through, let alone coming back. Let me see if I can find where I read that.....
Also, I remember reading a while back about the cooling system for a 4-rotor. Basically, it's too long of a travel for the coolant to go into the block and then back out again, as well as mentioning that the coolant is already hot enough mid way through, let alone coming back. Let me see if I can find where I read that.....
#36
Back at it again!!
iTrader: (3)
Join Date: Jun 2003
Location: Western Colorado
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
Oh yeah, it was when I was reading the granny's 4-rotor. It's mentioned on the page, and there's also a picture of how he did it (1st picture)
http://members.tripod.com/~grannys/4rotor.html
http://members.tripod.com/~grannys/4rotor.html
#37
Injected with a Poison
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: Miami, FL
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
I really cant get into why we are using that combination of irons but i can go as far as to say that it has patially to do with the second part of your question and cooling. I will also add that the porting on the iron makes no difference as this will be a full peripheral port engine.
Just wondering why you have 4 port and 6 port irons.
Also, I remember reading a while back about the cooling system for a 4-rotor. Basically, it's too long of a travel for the coolant to go into the block and then back out again, as well as mentioning that the coolant is already hot enough mid way through, let alone coming back. Let me see if I can find where I read that.....
Also, I remember reading a while back about the cooling system for a 4-rotor. Basically, it's too long of a travel for the coolant to go into the block and then back out again, as well as mentioning that the coolant is already hot enough mid way through, let alone coming back. Let me see if I can find where I read that.....
#39
See its projects like this that makes me wear the rotary like a badge of honor can't wait to see it finished.gotta say thanx for keeping the spirit of rotary racing alive.happy building
#41
Banned. I got OWNED!!!
Join Date: Jan 2005
Location: new york
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
4rotor
I haven't been on this forum for a while and this thread caught my attention i would like to know what's so special about the "supposly" 4 rotor being built, that no information can be given... it's not like it hasn't been done before.....Australia did it.....Team Spencer has them on their race cars ......one is being built in Canada ......and if you call these people they'll give you information about it .......point blank it's nothing out of this world ..its already been done ...so what's the big deal?...... so please someone enlighten me on what's so special about it. It's just another 4 rotor..........Thanks
#42
Well for us local guys, there aren't exactly dozens of 4 rotors running around on the street. Twin turbo LS7 Z06s have been done hundreds of times too, but I still think they're badass, like the one at my job now. So please exuse our excitement.
#43
Junior Member
iTrader: (34)
Join Date: Nov 2004
Location: AZ
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I haven't been on this forum for a while and this thread caught my attention i would like to know what's so special about the "supposly" 4 rotor being built, that no information can be given... it's not like it hasn't been done before.....Australia did it.....Team Spencer has them on their race cars ......one is being built in Canada ......and if you call these people they'll give you information about it .......point blank it's nothing out of this world ..its already been done ...so what's the big deal?...... so please someone enlighten me on what's so special about it. It's just another 4 rotor..........Thanks
#46
Im Back Bitches
iTrader: (1)
Join Date: Dec 2003
Location: crazyness
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
I haven't been on this forum for a while and this thread caught my attention i would like to know what's so special about the "supposly" 4 rotor being built, that no information can be given... it's not like it hasn't been done before.....Australia did it.....Team Spencer has them on their race cars ......one is being built in Canada ......and if you call these people they'll give you information about it .......point blank it's nothing out of this world ..its already been done ...so what's the big deal?...... so please someone enlighten me on what's so special about it. It's just another 4 rotor..........Thanks
OHH This guys a Hater......
#47
Banned. I got OWNED!!!
Join Date: Jan 2005
Location: new york
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
4rotor
it's not that i'm a hater, because a project of this matter probably requires alot of financial resources which i don't have.....its just that this was said in another thread and i just want to know what's the mystery behind the project that it needs to be kept so secret ...what are they the C.I.A?
"As to the 4 Rotor Twin Turbo Fd : At the Owner's request, we are not at liberty to give details of this project at this time. Only details are that development is all done, ancillaries, manifolds, and sub systems also done, engine is in final stages of assembly, and initial setup and tuning will be done on our Engine Dyno prior to instalation.
The project is quite far along, and it's a matter of time before testing.
The project's owner also wishes to remain anonymous for the time been."
.........it's not in a bad way i'm just saying why so much mystery.
........IM NOT A BALLER TO THROW AWAY MONEY LIKE THAT
"As to the 4 Rotor Twin Turbo Fd : At the Owner's request, we are not at liberty to give details of this project at this time. Only details are that development is all done, ancillaries, manifolds, and sub systems also done, engine is in final stages of assembly, and initial setup and tuning will be done on our Engine Dyno prior to instalation.
The project is quite far along, and it's a matter of time before testing.
The project's owner also wishes to remain anonymous for the time been."
.........it's not in a bad way i'm just saying why so much mystery.
........IM NOT A BALLER TO THROW AWAY MONEY LIKE THAT
#50
Im Back Bitches
iTrader: (1)
Join Date: Dec 2003
Location: crazyness
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
it's not that i'm a hater, because a project of this matter probably requires alot of financial resources which i don't have.....its just that this was said in another thread and i just want to know what's the mystery behind the project that it needs to be kept so secret ...what are they the C.I.A?
"As to the 4 Rotor Twin Turbo Fd : At the Owner's request, we are not at liberty to give details of this project at this time. Only details are that development is all done, ancillaries, manifolds, and sub systems also done, engine is in final stages of assembly, and initial setup and tuning will be done on our Engine Dyno prior to instalation.
The project is quite far along, and it's a matter of time before testing.
The project's owner also wishes to remain anonymous for the time been."
.........it's not in a bad way i'm just saying why so much mystery.
........IM NOT A BALLER TO THROW AWAY MONEY LIKE THAT
"As to the 4 Rotor Twin Turbo Fd : At the Owner's request, we are not at liberty to give details of this project at this time. Only details are that development is all done, ancillaries, manifolds, and sub systems also done, engine is in final stages of assembly, and initial setup and tuning will be done on our Engine Dyno prior to instalation.
The project is quite far along, and it's a matter of time before testing.
The project's owner also wishes to remain anonymous for the time been."
.........it's not in a bad way i'm just saying why so much mystery.
........IM NOT A BALLER TO THROW AWAY MONEY LIKE THAT