allrotor93

iTrader: (126)

We just moved into a larger shop so we have room for more than just my cars

1 week turn around guaranteed for rebuilds and 2 weeks if requiring R&R of motor pending replacement parts.

PM me for pricing and details

Our engine builder has been building motors for 20+ years and offers a 12 month warranty on every build. He has personally built over 100 3rd gen motors for me.

Porting available. Engine rebuilds include the following parts being replaced:

ALS apex seals
OEM inner and outer apex seal springs
OEM side seals and springs
OEM corner seals and springs
OEM inner and outer water seals
OEM oil dowel orings
OEM rear stationary oring
Viton oil control orings
Front and rear main seals
Front cover metal gasket
Thermal pellet
Pilot bearing and seal
Thrust bearings
Oil pump chain

David Hayes

iTrader: (6)

Yes, you can't go wrong here. Great guys and some of the most knowledgable rotary mechanics and tuners around. I take my car to them and the experience has been outstanding. For those of you needing rebuilds, this is the place to go.

Now if only allrotor93 would get his crappy 3 rotor done we could go out and have some fun - you guys are going to have to see his car. One of the nicest ones out there

David Hayes

iTrader: (6)

I spy two 3 rotors in the shop! Jon's in white and mine in black:

Islander

iTrader: (6)

Good deal. Now get a dyno and start tuning.

David Hayes

iTrader: (6)

They don't have a dyno yet but they have one of the best tuners in the business running the shop. I just got sponsored by Haltech and they are installing and the tuning my car with the Haltech PS 2000.

There is a dyno close by and that is what they currently use.

sk8world

iTrader: (5)

What did you get sponsorship for? I mean I dint know you raced. Or is it for car shows?

David Hayes

iTrader: (6)

^ For car shows, some track events, and hopefully the Modified Magazine Tuner Shootout next year.

0110-M-P

iTrader: (10)

Jon, where is your shop located? And who's doing your tuning?

I'm going to need some tuning in the coming months.

M-P

864angel112

iTrader: (7)

I'll answer that since only been up there about 3 times this month. It's in ashville north takalaky just of exist 40 on 26 air port rd. Steve is the man I've talked to lots of ppl about rotarys but he always seems to impress me with his knowledge.

G's 3rd Gen

iTrader: (11)

+1 for thumbs up. Great experience with Steve and John. Probably the best I've seen in the Mid-Atlantic. G

DerrickS

So do you guys work on all rotor engines, like say S3's in an FB??

I think I work with a guy named Curtis that somehow knows you folks. His friend has a white FC, and he kept telling me about these guys that just opened a new shop on airport road.

allrotor93

iTrader: (126)

Yes we work on all rotaries. We would be the shop he mentioned

blkkarmafd

do you guys sell oem part there too?

allrotor93

iTrader: (126)

I do have some OEM parts

pm me what you need

Gringo Grande

iTrader: (97)

Jon is one of my favorite people to do business with. He and I started off a little rocky a few years ago due to some miscommunication and he made the effort to clear it up in person at DGRR a few years ago.

Since then we've sold parts back and forth to each other numerous times and I'd say he is one of the top 3-5 sellers of used FD Parts on the forum including Fritz Flynn, DJSeven and myself.

Great to have someone with Jon's reputation being involved with a shop in that area of the country.

cairyl09

whats up man? i see that you go to nc state like i do. or went? lol where are you guys located at?

allrotor93

iTrader: (126)

In Asheville nc

Ruler_Mark

iTrader: (16)

Watch out, don't give Jon your cell he will txt you nice parts at good deals and peddle them like a dealer. :P

Gryphen

iTrader: (8)

Just a heads up but there is a guy here in Columbia, SC that is claiming the picture of the 3 FD's above is of his shop called Butler Performance. Sad that people try to claim **** that isn't there own. Even worse is he argued with me over and over that it is his shop even know I know the truth and even showed him this thread to prove him wrong.

Here is a link to his FB account: http://www.facebook.com/danny.butler.9849?fref=ts

He also tried to claim he built this:


It's been all over magazines and had a major feature in Super Street. http://www.superstreetonline.com/fea...d/viewall.html

Gringo Grande

iTrader: (97)

Wow...what a scumbag...and a joke. I just looked at his FB Page. Hahah. He's got a picture of Mariusz Pudzianowski that he seems to be playing off as his own also. My favorite part of the above post is if you read the article, it tells you the shop that built the RB26 FD is in Wisconsin. A Miami local said this kid is a VW crowd poser lol. God Bless the internet.

DerrickS

Hey - Sent you a PM. PM me back with a phone number. My car is sick, and I'm thinking a rebuild is in it's future. Would be nice to get it built local.

Thanks!

0110-M-P

iTrader: (10)

Who's car is that with a RB26 in it? I built an RB26 back in 2007 and had the valve covers and everything powder coated that same color blue. I was going to put it in my 350Z, but later scrapped that project to buy my current FD and sold the engine (freshly built) to a guy who was going to put it in an RX-7. Wonder if it is the same engine???

JenniferMal

Are you guys talking about Steve Oz... off Airport Rd? He is awesome! He works on my '88 vert. Does an amazing job. I highly reccommend him.

jake87

I recently contacted Jon about a car he had built several years ago and sold. I bought the car and was trying to get a little more info about it and he was very nice in helping me gather some specs on the car. Seems to be a good guy and I am about 4-5 hrs away so might have to make the trip one of these days.