camp lejeune/ jacksonville NC
#1301
Rotary Enthusiast
Join Date: Apr 2004
Location: Oviedo, FL
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
great video, drifting is where it's at hands down lol
i got the axles out finally thanks to a handy pry bar set, didnt look like there was any damage to the splines on either of the axles so i'm dropping the diff right now. my guess is that the damage is in the diff...yay
i got the axles out finally thanks to a handy pry bar set, didnt look like there was any damage to the splines on either of the axles so i'm dropping the diff right now. my guess is that the damage is in the diff...yay
#1302
Junior Member
Join Date: Feb 2005
Location: Charlotte, NC
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Baaah sorry man i was in stone bay all week so i couldnt get on the internet. I'd have gone out with you guys but im in raleigh right now. Hopefully sometime soon
#1304
Scotty Doesnt Know
iTrader: (3)
the car cruised home fine it only stumbles when you get on the throttle heavy so its almost like when it senses boost it stumbles. Ill have to order some 550's anyway so we'll have to wait to troubleshoot it then. I hate this cause I can feel the car wants to GO! then she falls on her face. frustrating
#1307
Scotty Doesnt Know
iTrader: (3)
after sleeping on it a little I have come to think of a few problems it might be.
1-injectors dont flow properly or open fully or whatever can **** me off
2-bad ground somewhere
3-boost leak. never noticed it before b/c when it DID go into full boost it would cut
out.
4-injector clip connectors loose again from tugging on wires when splicing
5-dirty fuel filter-buying today
6-weak or shitty fuel pump-need to install my walbro
7-spark plugs-God knows what they look like or where they are from if there were
n/a injectors in there, I guess Ill buy those too. and ohm out my wires as well.
Im gonna guess 2,5 and/or 6 b/c it cruised and took off great and pulled better than before but when i start to get into boost it stumbles but then it would continue to stumble if it was a boost leak when I steadily made higher boost. Any other idea are greatly appretiated. The next time Ill get to work on it will have to be the weekend after next since i have to work.
1-injectors dont flow properly or open fully or whatever can **** me off
2-bad ground somewhere
3-boost leak. never noticed it before b/c when it DID go into full boost it would cut
out.
4-injector clip connectors loose again from tugging on wires when splicing
5-dirty fuel filter-buying today
6-weak or shitty fuel pump-need to install my walbro
7-spark plugs-God knows what they look like or where they are from if there were
n/a injectors in there, I guess Ill buy those too. and ohm out my wires as well.
Im gonna guess 2,5 and/or 6 b/c it cruised and took off great and pulled better than before but when i start to get into boost it stumbles but then it would continue to stumble if it was a boost leak when I steadily made higher boost. Any other idea are greatly appretiated. The next time Ill get to work on it will have to be the weekend after next since i have to work.
#1310
Rotary Enthusiast
Join Date: Apr 2004
Location: Oviedo, FL
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
after sleeping on it a little I have come to think of a few problems it might be.
1-injectors dont flow properly or open fully or whatever can **** me off
2-bad ground somewhere
3-boost leak. never noticed it before b/c when it DID go into full boost it would cut
out.
4-injector clip connectors loose again from tugging on wires when splicing
5-dirty fuel filter-buying today
6-weak or shitty fuel pump-need to install my walbro
7-spark plugs-God knows what they look like or where they are from if there were
n/a injectors in there, I guess Ill buy those too. and ohm out my wires as well.
Im gonna guess 2,5 and/or 6 b/c it cruised and took off great and pulled better than before but when i start to get into boost it stumbles but then it would continue to stumble if it was a boost leak when I steadily made higher boost. Any other idea are greatly appretiated. The next time Ill get to work on it will have to be the weekend after next since i have to work.
1-injectors dont flow properly or open fully or whatever can **** me off
2-bad ground somewhere
3-boost leak. never noticed it before b/c when it DID go into full boost it would cut
out.
4-injector clip connectors loose again from tugging on wires when splicing
5-dirty fuel filter-buying today
6-weak or shitty fuel pump-need to install my walbro
7-spark plugs-God knows what they look like or where they are from if there were
n/a injectors in there, I guess Ill buy those too. and ohm out my wires as well.
Im gonna guess 2,5 and/or 6 b/c it cruised and took off great and pulled better than before but when i start to get into boost it stumbles but then it would continue to stumble if it was a boost leak when I steadily made higher boost. Any other idea are greatly appretiated. The next time Ill get to work on it will have to be the weekend after next since i have to work.
STOP DRIFTING AND YOUR **** WON'T BREAK....lol
#1315
Scotty Doesnt Know
iTrader: (3)
been a while since my last bump but this coming saturday Im heading back to j-ville to see if we can work on my car again as well as hit up some backroads if everything goes well. Guys that came out last time should definitely come out again, it was a pretty good group.
#1316
Can I be the Emperor?
iTrader: (13)
ooh....back roads of j-ville, nc...exciting hahaha...you guys need to come up here for a weekend, when the weather gets warmer, we'll plan a camp out! show up on friday evening, camp out (or get a hotel for those who want to...), drive saturday, camp then (with a nice big fire!), then drive a little on sunday before everyone goes home!
good luck with ur car this coming weekend, ruben
good luck with ur car this coming weekend, ruben
#1319
Full Member
Join Date: Jun 2007
Location: Norfolk, VA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
I havent been able to get on ncrotaries for the past few days, I was ognna post up there so I see it has already been done
Im good friends with Gr3ddy and he guilts me into coming up there all the time to drive and such, plus I just love Asheville!
Im good friends with Gr3ddy and he guilts me into coming up there all the time to drive and such, plus I just love Asheville!
#1323
Full Member
Join Date: Jun 2007
Location: Norfolk, VA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
New FC arriving in Wilmington this weekend Im pickiing her up Saturday... Anyone met the new guy in town driving the Montego Blue FD with the spolier on it? He is my new neighbor but I have yet to see him.
#1324
Scotty Doesnt Know
iTrader: (3)
Nobodys talked about it or anything. The weekly meets dont happen but sporadic gatherings occur at random times. I would like to come down to j-ville if erick will be there to throw on the new stuff. Anybody else down, speak up, but there will probably be a few pop-ins like there were last time that kinda turned into a meet.