On Sunday December 20th from 10am-5pm Mike The Mechanic will play host to a $40 alignment day and rotary meet. This event is open to anything rotary. If you have a rotary project that isn't finished bring out your daily driver. There is a 15 car cap on alignment due to time restrictions, so RSVP quickly. Any no show spots will be filled on a first come first serve basis. If anyone has reserved a spot, but is not able to have an alignment done due to time restrictions they will be given first right at the next alignment day. This may become a tri-monthly event. We may be able to open a second lift for small repairs or part installation if there is a positive response(repairs and installations will cost extra). If you RSVP for an alignment spot PLEASE MAKE SURE YOUR VEHICLE IS "READY" FOR AN ALIGNMENT(unless specified before in RSVP) . For example: tie rods are not blown, shocks are not blown.
What RSVP should include:
Name
Phone Number
Year, make, model
Parts for replacement
Any aftermarket parts that pertain to an alignment
Alignment specifications(if other than stock)

This is the first Alignment Day/Rotary Meet at Mike The Mechanics and hopefully not the last. It will be a good time for everyone.
http://www.mikethemechanic.com/index.php
451 Toonigh Rd., Woodstock,
GA 30188
For any questions call Jon at 770-873-1152 between 7pm-7am.

 

Pm for any questions or RSVPs.

 

how much for a bicycle?? lol jk

 

got 4 spots filled already and only one is a rotary. Represent.

 

This is a great idea! Another car club I belonged to used to have an air conditioning recharge day. That always got a good response. Hope this one does too. (Unfortunately I'm too far away to take part.)

 

thanks for the support. We now have 6 confirmed to do alignments and possibly one for urethane bushings. Still on one rotary powered Rx7.

 

how much for the bushing replacements and to install racing beat swaybars?