RX-7 video
Thread Starter
Joined: Oct 2002
Posts: 673
Likes: 0
From: south coast MA
RX-7 video
This is a little vid I put together of me driffting around a parking lot. It's only a couple min. long didn't come out to bad either, but I ended up blowing an oil seal in my turbo OH WELL!!!!
http://fycracing.com/graphite03/Video/RX7_Drift.wmv
if that doesn't work go here
http://forum.fycracing.com/viewtopic.php?t=1121&start=0
http://fycracing.com/graphite03/Video/RX7_Drift.wmv
if that doesn't work go here
http://forum.fycracing.com/viewtopic.php?t=1121&start=0
yeah the vid would have been best without music so i say the last part was my favorite..
also, you are going pretty slow to sustain a long drift..
but cool vid nonetheless..
also, you are going pretty slow to sustain a long drift..
but cool vid nonetheless..
Trending Topics
Thread Starter
Joined: Oct 2002
Posts: 673
Likes: 0
From: south coast MA
""yeah the vid would have been best without music so i say the last part was my favorite..
also, you are going pretty slow to sustain a long drift..""
yea I should have gone like 50 - 60 mph and really drifted good, right into a building cuz there was not nearly enough room to be going any faster than I was and still be safe, and runing a full circle in 2nd gear wich I did do in the vid just wasn't sustained enough of a drift for you cuz you're just so much better I'm sure. And yea there def. should not have been any music cuz it would have been great to just hear constant screeching tires for 3 min. cuz that wouldn't get old. but thanks for your imput "drift king"
"Umm......I dont know about that video...."
But then again I think drifting is a huge waste of time/money..."
so you only invest your money in things that can gain you money back right? you don't put any money in to hobbys or entertainment. I bet you are building a drag car right now, that sounds like drag racer talk to me, or a show car maybe.
""man I felt bad for that motor, you were ROMPING that thing""
yea cuz the FD is a family sadan ment to cruze around at 35mph and nevr go over 4K RPM
WHO CARES it's a rotary it's gona blow any minute might as well enjoy it !!! and they are cheep to rebuild when compaired to a pistion motor.
I can't deal with you people...........
also, you are going pretty slow to sustain a long drift..""
yea I should have gone like 50 - 60 mph and really drifted good, right into a building cuz there was not nearly enough room to be going any faster than I was and still be safe, and runing a full circle in 2nd gear wich I did do in the vid just wasn't sustained enough of a drift for you cuz you're just so much better I'm sure. And yea there def. should not have been any music cuz it would have been great to just hear constant screeching tires for 3 min. cuz that wouldn't get old. but thanks for your imput "drift king"
"Umm......I dont know about that video...."
But then again I think drifting is a huge waste of time/money..."
so you only invest your money in things that can gain you money back right? you don't put any money in to hobbys or entertainment. I bet you are building a drag car right now, that sounds like drag racer talk to me, or a show car maybe.
""man I felt bad for that motor, you were ROMPING that thing""
yea cuz the FD is a family sadan ment to cruze around at 35mph and nevr go over 4K RPM
WHO CARES it's a rotary it's gona blow any minute might as well enjoy it !!! and they are cheep to rebuild when compaired to a pistion motor.
I can't deal with you people...........
Last edited by Rayman93RX7; Jun 12, 2005 at 03:32 AM.
Originally Posted by Cgotto6
Umm......I dont know about that video....
But then again I think drifting is a huge waste of time/money...
But then again I think drifting is a huge waste of time/money...
I strongly disagree with your comment Sir but I will defend to my death your right to say it!!!.............hahahaha.
I am fairly sure that the guys down at D1 GP would have something to say against that comment........LOL..........
Drifitng is fun and it takes skill................but to each his own in all fairness.
Peace
its your car. so you do what you want to do with it. don't let any one tell you different. as long as you enjoy your car, and take care of it, thats all that matters. nice car by the way. What are your mods
Originally Posted by Rayman93RX7
""yeah the vid would have been best without music so i say the last part was my favorite..
also, you are going pretty slow to sustain a long drift..""
yea I should have gone like 50 - 60 mph and really drifted good, right into a building cuz there was not nearly enough room to be going any faster than I was and still be safe, and runing a full circle in 2nd gear wich I did do in the vid just wasn't sustained enough of a drift for you cuz you're just so much better I'm sure. And yea there def. should not have been any music cuz it would have been great to just hear constant screeching tires for 3 min. cuz that wouldn't get old. but thanks for your imput "drift king"
"Umm......I dont know about that video...."
But then again I think drifting is a huge waste of time/money..."
so you only invest your money in things that can gain you money back right? you don't put any money in to hobbys or entertainment. I bet you are building a drag car right now, that sounds like drag racer talk to me, or a show car maybe.
""man I felt bad for that motor, you were ROMPING that thing""
yea cuz the FD is a family sadan ment to cruze around at 35mph and nevr go over 4K RPM
WHO CARES it's a rotary it's gona blow any minute might as well enjoy it !!! and they are cheep to rebuild when compaired to a pistion motor.
I can't deal with you people...........
also, you are going pretty slow to sustain a long drift..""
yea I should have gone like 50 - 60 mph and really drifted good, right into a building cuz there was not nearly enough room to be going any faster than I was and still be safe, and runing a full circle in 2nd gear wich I did do in the vid just wasn't sustained enough of a drift for you cuz you're just so much better I'm sure. And yea there def. should not have been any music cuz it would have been great to just hear constant screeching tires for 3 min. cuz that wouldn't get old. but thanks for your imput "drift king"
"Umm......I dont know about that video...."
But then again I think drifting is a huge waste of time/money..."
so you only invest your money in things that can gain you money back right? you don't put any money in to hobbys or entertainment. I bet you are building a drag car right now, that sounds like drag racer talk to me, or a show car maybe.
""man I felt bad for that motor, you were ROMPING that thing""
yea cuz the FD is a family sadan ment to cruze around at 35mph and nevr go over 4K RPM
WHO CARES it's a rotary it's gona blow any minute might as well enjoy it !!! and they are cheep to rebuild when compaired to a pistion motor.
I can't deal with you people...........
and im not a drift king, i think drifting sucks lol
Originally Posted by TurboIIGuy
I strongly disagree with your comment Sir but I will defend to my death your right to say it!!!.............hahahaha.
I am fairly sure that the guys down at D1 GP would have something to say against that comment........LOL..........
Drifitng is fun and it takes skill................but to each his own in all fairness.
Peace
I am fairly sure that the guys down at D1 GP would have something to say against that comment........LOL..........
Drifitng is fun and it takes skill................but to each his own in all fairness.
Peace
Originally Posted by Cgotto6
Not necessairly bashing on real drifting, because your right, it does take real skill. But what this guy was doing....was most definetly not drifting....
True it was not drifting..............it was just some fun sliding, kind of like what everyone with a fun driving spirit does when its raining.
I have a had a couple of 3rd gens in the past and I was never affraid to pop the clutch and get that thing sideways............its the funnest and best feeling.
I still do it in my 1st gen and my 2nd gen Turbo.
But to everyone his own.
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
Mar 20, 2018 01:54 PM
Under PSI
3rd Generation Specific (1993-2002)
19
Sep 23, 2015 11:47 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM



