Rtek used rtek 2.1; wont connect with ecu
10-28-09, 09:38 AM
#1
Full Member
Thread Starter
iTrader: (5)
Join Date: May 2009
Location: wilm,nc
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
used rtek 2.1; wont connect with ecu
I bought a used rtek 2.1 ecu and handspring visor pda from a member on the board a few months ago but i just got my car running again so i tried to hood it up. I loaded the latest logger off the pocketlogger site and it loads into the pda fine but when i go to hook it up to the ecu there is a big x in the top right hand corner of the screen. I have tried to delete and completely reinstall this program 3 times with still no success. Any input would be appreciated.
10-28-09, 11:30 AM
#3
Full Member
Thread Starter
iTrader: (5)
Join Date: May 2009
Location: wilm,nc
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
the hotsync cable im using is a handspring cable and one end is a com port that fits into the ecu cable and the other end is a Y and has a usb plug and a plug which fits into the pda
10-28-09, 11:38 AM
#4
Y cables dont work. You need a straight serial hotsync cable.
Unfortunately I dont stock them.
The Visor cables can be a bit finicky. You can try this one but I can't guarantee it will work.
http://www.pdapreferred.com/serial-h...m-cl-601-.html
Another option is to get a handspring serial cradle which definitely works.
http://www.google.com/products?q=han...hotsync+cradle
The problem is the PDA wont stay in it when you drive around.
Unfortunately I dont stock them.
The Visor cables can be a bit finicky. You can try this one but I can't guarantee it will work.
http://www.pdapreferred.com/serial-h...m-cl-601-.html
Another option is to get a handspring serial cradle which definitely works.
http://www.google.com/products?q=han...hotsync+cradle
The problem is the PDA wont stay in it when you drive around.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
