Rtek Starting Over
#1
Senior Member
Thread Starter
Starting Over
I have been away for Airforce bmt and tech school for the last 8 months and naturally my palm died in my absence. not a big deal usually but i also discovered the only computer i use for my tunning has a blue screen. I have acquired the pocketlogger software and installed it on my palm via a new computer, but all of my info logs/fuel/timing ( that took 4 hrs to install ) are all still on my old hard drive. I am wondering if i connect the palm to the ecu ( that should still be running my latest maps ect. ) will the palm re install the info from the ecu? or erase everything?
I have my old hardrive out and externally powered up to try and hot sync my previous logs/maps ect. I am just not sure if i should hook it up to the ecu like it is now with no info.
Thanks,
Shane
I have my old hardrive out and externally powered up to try and hot sync my previous logs/maps ect. I am just not sure if i should hook it up to the ecu like it is now with no info.
Thanks,
Shane
#2
Rotary Enthusiast
iTrader: (1)
The Palm will never overwrite the ECU when it connects. It always "views" what is in the ECU. The only time the ECU is changed is if you make a change to a cell or you use the "upload map" feature.
I suggest you connect then "save map" so you have a copy on your Palm. Hotsync and you'll have a copy on your computer.
I suggest you connect then "save map" so you have a copy on your Palm. Hotsync and you'll have a copy on your computer.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM