Rtek Forum Discuss the Rtek 2.0 and other Rtek ECU's

Rtek Rtek 1.8 on stock engine

Old Nov 9, 2006 | 09:23 AM
  #1  
FCKing1995's Avatar
Thread Starter
Rotary Slave
Tenured Member 10 Years
iTrader: (3)
 
Joined: Jul 2005
Posts: 1,599
Likes: 1
From: Birmingham, Alabama
Rtek 1.8 on stock engine

How will this effect the car with no mods? Im doing this first since I have leaky injectors and it makes daily driving near impossible since it floods so badly. Will having the 4x720's make it run rich or will it compensate enough to keep it at a reasonable a/f? I plan on very soon getting exhaust, followed by BNR stage 3 and some other junk. Thanks for the help
Reply
Old Nov 10, 2006 | 01:38 AM
  #2  
turbo2ltr's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jul 2003
Posts: 1,328
Likes: 7
From: ..
A car with no mods would mean you are running stock injectors, so the 1.8 would not be a good choice as it requires 720x4.

Now if you have the 720x4 injectors, then you should be fine.
Reply
Old Nov 10, 2006 | 02:26 AM
  #3  
FCKing1995's Avatar
Thread Starter
Rotary Slave
Tenured Member 10 Years
iTrader: (3)
 
Joined: Jul 2005
Posts: 1,599
Likes: 1
From: Birmingham, Alabama
Originally Posted by turbo2ltr
A car with no mods would mean you are running stock injectors, so the 1.8 would not be a good choice as it requires 720x4.

Now if you have the 720x4 injectors, then you should be fine.
well of course Ill have the 4x 720's, just wasnt sure if having the stock restrictive exhaust and all of that would cause problems. Wasnt sure if the 1.8 would compensate low enough on the larger injectors to keep it from running pig rich.
Reply
Old Nov 10, 2006 | 08:22 PM
  #4  
turbo2ltr's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jul 2003
Posts: 1,328
Likes: 7
From: ..
It's designed to keep the target AFRs the same as the stock motor. You'll be fine.
Reply
Old Nov 13, 2006 | 12:39 PM
  #5  
JeffForSale!'s Avatar
buy me *)
Tenured Member: 20 Years
 
Joined: Jan 2004
Posts: 231
Likes: 1
From: Dallas, TX
Has anyone installed a RTek 1.8 yet? any starting problems with the 720 primaries?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smikels
Rtek Forum
4
May 12, 2016 12:34 AM
eddierotary
Rtek Forum
1
Aug 25, 2015 05:48 PM
eddierotary
2nd Generation Specific (1986-1992)
4
Aug 16, 2015 04:12 PM
baconflavored
SE RX-7 Forum
0
Aug 12, 2015 12:07 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:44 PM.