Rtek Forum Discuss the Rtek 2.0 and other Rtek ECU's

Rtek RTEK 1.8, 4 x 750cc injectors, Apexi Neo MAXED - STILL LEAN UNDER WOT

Thread Tools
 
Search this Thread
 
Old 05-10-12, 12:56 AM
  #26  
Me Wantee Da' Boostee

Thread Starter
iTrader: (6)
 
Bearzah's Avatar
 
Join Date: Jul 2004
Location: corvallis, or
Posts: 766
Received 1 Like on 1 Post
Hmm.. AutoZone has a rental fuel system gauge...
http://www.autozone.com/autozone/acc...er=913437_0_0_
Old 05-10-12, 08:53 AM
  #27  
Me Wantee Da' Boostee

Thread Starter
iTrader: (6)
 
Bearzah's Avatar
 
Join Date: Jul 2004
Location: corvallis, or
Posts: 766
Received 1 Like on 1 Post
I'm basing everything on my wideband numbers... I wideband i suspect has issues.. I've decided to stop troubleshooting until i install a new sensor.. Already in the mail
However, i will clean up my ECU grounding and pull a spark plug to see how they look this afternoon
Old 05-11-12, 10:43 PM
  #28  
Me Wantee Da' Boostee

Thread Starter
iTrader: (6)
 
Bearzah's Avatar
 
Join Date: Jul 2004
Location: corvallis, or
Posts: 766
Received 1 Like on 1 Post
UPDATE: with car idling i grounded each secondary injector at ECU... Front and rear both bogged engine down and killed it = they are working and i have already confirmed secondary injectors are getting signal while running (earlier post)...

Fuel pressure has been checked... According to gauge, at idle its sitting at 50-52 psi (i assume this may not be accurate, but i was checking for PRESSURE DROP)... Under load (no boost) it drops to 42-44 psi and raises up and HOLDS 52-ish psi at 8-9 psi boost. AFRs hit mid-12s under WOT... For the skeptics out there, here's proof: (at beginning of video, the needle is pointed at 50-52psi.. For referance) http://www.youtube.com/watch?v=mjd82...e_gdata_player

So... All i got is either my wideband is **** (new sensor in mail), i need larger injectors and/or time for stage 2 RTEK

... Yup
Old 05-13-12, 12:44 PM
  #29  
Me Wantee Da' Boostee

Thread Starter
iTrader: (6)
 
Bearzah's Avatar
 
Join Date: Jul 2004
Location: corvallis, or
Posts: 766
Received 1 Like on 1 Post
New wideband sensor installed and actually preheats!!!
.. But, still lean on WOT. *Its mid-11s up to WOT though.
... While i MAY not be maxing my current injectors i don't see why installing larger secondaries couldn't fix my situation >*http://www.injectordynamics.com/ID1000.html
Old 05-13-12, 03:11 PM
  #30  
Rotary Enthusiast

iTrader: (1)
 
ncfc3s's Avatar
 
Join Date: Mar 2007
Location: sc
Posts: 817
Likes: 0
Received 0 Likes on 0 Posts
You may want to have your injectors flow tested. I've heard horror stories about rc injectors not being anywhere near what they are supposed to be.
Old 05-17-12, 06:53 PM
  #31  
Me Wantee Da' Boostee

Thread Starter
iTrader: (6)
 
Bearzah's Avatar
 
Join Date: Jul 2004
Location: corvallis, or
Posts: 766
Received 1 Like on 1 Post
I'm getting more hits on my thread i started in the 2nd gen section... Here's the thread..

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/rtek-1-8-4-x-750cc-injectors-apexi-neo-maxed-still-lean-under-wot-997235/
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
11-21-20 09:34 AM
bryancmatthews
Power FC Forum
14
10-05-15 08:49 PM
High_Carb_Diet
Power FC Forum
1
09-05-15 09:07 AM



Quick Reply: Rtek RTEK 1.8, 4 x 750cc injectors, Apexi Neo MAXED - STILL LEAN UNDER WOT



All times are GMT -5. The time now is 01:04 AM.