Rtek KD Rotary tuning.....
#1
Full Member
Thread Starter
Join Date: Apr 2006
Location: Scranton, PA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
KD Rotary tuning.....
Does anyone have experience dealing with KD Rotary for tuning an Rtek 2.0 ECU? I've been talking to them for a bit, but wanted some input if anyone has personally dealt with them. They seem to be pretty reputable from what i've heard so far.
Any input, good or bad, is welcome....thanks.
-Mike
Any input, good or bad, is welcome....thanks.
-Mike
#2
I'm in rotary heaven!
Join Date: Dec 2006
Location: jax
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
I know Dave and Kim are old mazda techs from back in the day. I cant say much about there experience with the rtek but I know they are awesome mechs. Next time you see them tell them Russ the painter said HI!
#3
The Silent but Deadly Mod
iTrader: (2)
They tuned my GTUs........
The power gains were standard, but the throttle response gains were tremendous.....it felt like i was driving a whole new car.
It's mainly due to Dave's timing tables, it's really really good for my car at least.
I was amazed at how different the car was before and afterwards.
Don't worry if he only makes minor changes to the fuel map, that's all he needed to do for mine. I may decide to fiddle around with it some more, but it's done a good job for me, I have a lot more breathing room when I drive the FC on a track (poconos, lime rock, etc...)
Let me know if you're going to go anytime soon, I'll stop by and assist with some of the tuning if you want.
The power gains were standard, but the throttle response gains were tremendous.....it felt like i was driving a whole new car.
It's mainly due to Dave's timing tables, it's really really good for my car at least.
I was amazed at how different the car was before and afterwards.
Don't worry if he only makes minor changes to the fuel map, that's all he needed to do for mine. I may decide to fiddle around with it some more, but it's done a good job for me, I have a lot more breathing room when I drive the FC on a track (poconos, lime rock, etc...)
Let me know if you're going to go anytime soon, I'll stop by and assist with some of the tuning if you want.
#4
Full Member
Thread Starter
Join Date: Apr 2006
Location: Scranton, PA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the input guys.....i'm looking to make a trip down there sometime in February and kinda make a day of it too. I'm sure my buddy Dave will want to go if he ever gets his 10AE finished
#5
Full Member
Thread Starter
Join Date: Apr 2006
Location: Scranton, PA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Ok, tuning session on the 27 of March went really well. The rx made 240whp and 235 lb-ft of torque to the wheels. I'll have the dyno results up soon when I can scan them. Dave @ KDR Performance is a really amazing tuner and my overall experience with the shop so far is excellent! Anyone else thinking of having them tune your car don't hesitate to set up an appt. with them.
-Mike
-Mike
#7
Senior Member
Join Date: Mar 2004
Location: Cleveland
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM
Under PSI
3rd Generation Specific (1993-2002)
19
09-23-15 11:47 PM