I've been using ZTPLVIEWER almost exclusivly, but I do have a liner output to the ECU from the Zeitronix unit.

So when I download a log to RXPLVIEWER from the Palm, why does the afr read like 2.5 instead of 14.8 afr? Unlike the ZTVIEWER where all the 02 readings are in the 14.8 format?

I can look at logs ON the PALM and they read 14.8 afr as an example, instead of what I see on the PLVIEWER on the computer (see2.5 on the computer).

I read the PLVusers Guide 2.04 and don't have the drop down screens shown in that guide from Preferences.

Seems I vaguley remember having put numbers in the Analog Input Two in the past. Can't remember.

It's a V2.1.3 Bulid 2

 

You have to make sure the RX7 Viewer has the analog scaling set up like on the Palm.

In RXViewer:
Preferences -> Custom sensors -> Analog 1 (ATP) or Analog 2 (Var Res)