Wooooo Hooooo Methanol ***video***
Thread Starter
7s before paint!!!
iTrader: (2)
Joined: Aug 2003
Posts: 3,814
Likes: 0
From: Philly/Texas
Wooooo Hooooo Methanol ***video***
The dyno date is close enough now that i threw some methanol in and started tuning idle and so forth. It sounds like death trough a megaphone. I am starting to have second thoughts about it now 


http://www.youtube.com/watch?v=zkMdKPeiF4w



http://www.youtube.com/watch?v=zkMdKPeiF4w
The dyno date is close enough now that i threw some methanol in and started tuning idle and so forth. It sounds like death trough a megaphone. I am starting to have second thoughts about it now 


http://www.youtube.com/watch?v=zkMdKPeiF4w



http://www.youtube.com/watch?v=zkMdKPeiF4w
Thread Starter
7s before paint!!!
iTrader: (2)
Joined: Aug 2003
Posts: 3,814
Likes: 0
From: Philly/Texas
Thread Starter
7s before paint!!!
iTrader: (2)
Joined: Aug 2003
Posts: 3,814
Likes: 0
From: Philly/Texas
Yeah, i will put the BOV on after the dyno and a couple passes

Thanks
Trending Topics
Thread Starter
7s before paint!!!
iTrader: (2)
Joined: Aug 2003
Posts: 3,814
Likes: 0
From: Philly/Texas
Drain the meth put in some reg gas start it up shut it down start it on reg gas let it run out put the meth in and your good to go.
It sound really good for a street port.
I want to see it run, but im sure not as much as you.
Good luck.
Thread Starter
7s before paint!!!
iTrader: (2)
Joined: Aug 2003
Posts: 3,814
Likes: 0
From: Philly/Texas
Thread Starter
7s before paint!!!
iTrader: (2)
Joined: Aug 2003
Posts: 3,814
Likes: 0
From: Philly/Texas
Yeah, it all worked out in the end. I am going to start about 8 AM and if everything goes well (still running) there is a midnight grudge race at the track that i plan on running at.







