Ok guys, last year sucked *** with the economy and many racers kept their cars in the garages and keyboard raced all year.

Who's comin out in 2010 and whatcha got planned?

I'm finally doing my paint and body on my all motor RX2 and plan to pep up the motor and hit some more racing this year. What about you guys???? Lets all get out there this year. What ya say?

 

God willing, 2010 will be a big year for me. The chassis is finally done! Hopefully the motor will get built soon!

 

I'm getting an automatic on mine FB for this coming year. Hoping in getting into mid to low 9's if my ***** are big enough to keep the throttle floored.

 

I have some unfinished business

 

^ First understatement of the year!

I'm hoping to get my *** to the track and bust into the 10's. Car's getting a cage and shedding some lb's right now. FC, stock suspension 13BT. I just hope my motor holds up.

 

BTW what is the fastest stock chassis w/aftermarket tranny in the U.S.?

 

Hopefully I will drop my et's as well. Gonna build a spare SemiPP motor too. May drop that in for the PanAm's and the 80mm back for that event.

 

im hoping to race in the importface off i ran last year with a full bridge all motor carb.i was happy this time.i just install a 13B TII set at 25 psi. its been to cold here to run her.friday ill tune her and get ready for sunday importface off.

 

About time you come over to the dark side and kick that bridge port **** to the curb!

 

Motor built? I thought you already dyno'd your motor. What happened with that motor?
Right on, good luck
Good luck Enzo.

Keep us posted.
Sounds good Ernie, good luck to you too.

Pedro, tell us more about your setup and times, we need more all motor guys here.

 

I had the time and money so i decided to build it right. I have one built and bagged up in the garage, one that i am going to build to put in the car, and enough stuff to build one more. Hopefully it will be one of those "if you have it you will never need it" kinda things!

 

i know i will see Ujay at the track.**** it is only the second week of 2010.i have had my hot rod out two times this year.over the long new year week end i installed my anti-roll bar and my spool!!!!the anti-roll bar helped out 100% now the car does not torque roll the body/chassis.as for the spool the car goes real straight now.at irwindale my 1/8 mile improved to a 1.26 sixty foot 6.03 @ 111.at fontana i went 1.33 sixty foot 6.11 @ 110 in the 1/8 9.700 @ 135 in the 1/4.when i went to fontana saturday for the street legals they limited me to a 10 second pass.the first pass i went a 1.300 sixty 6.05 @ 111 in the 1/8 then stood on the brakes,it went 11.00.that pass would have been a 9.60 something.i talked to the track manager after that pass and he gave me the green light to make full passes!!!it went a 9.76 9.73 9.700 playing with the tune up!!it seems that fontana is about .10th slower then irwindale!!the quickest 1/8 mile i had at fontana before saturday was a 6.12.so i think that 6.05 at fontana is going to be a 5.90 something at irwindale!!!i will be at irwindale this thursday 1/14/10 to see if i will finally get my 5.90 or better 1/8 mile time slip.maybe i will see you there Ujay?have you heard anything about the R100?

 

Another Allmotor here. Hoping to break into the 10's in the next few weeks.

 

Sounds like your on top of things as usual Chris.
1.26 60ft! . Must be nice. hehe. Weather down here in OC is unreal. It was 80 degrees on Saturday and Miami was in the 30's! Great time to race, but I have my car all apart getting ready for paint. I'll try and make it out on Thurs, but I have been busy at work.

Nice, got any pics of your car and setup?

 

It's not my car, it's a customers. He's unable to race it this season so he's kindly let us race it to see if we can crack a 10. Best ET to date is 11.16



http://www.youtube.com/watch?v=QB5bVvcpUbQ

 

I hope that within the next few months I can finally put down some comparable numbers to everyone then hit the track for the 1st time in 5 years.

 

Well I guess your right.... 700+ horsepower is not enough.
Good luck, I have been anxiously waiting to see you run your 3 and I know many others are too.

 

Nice clean setup you got there. Looks like a daily driver? Right hand drive eh? Where are you located?

 

Lets just say i have a few plans for the car in the very near future. If it all works out it should be a VERY wild ride!!!

 

i'm hoping to be at the track regularly this year as well.

 

It's not used as a daily driver, although it could be if the owner wanted to.
Location is New Zealand.

 

I'll race at the following events. I'll be at MIR for the other ones as a spectator.

Englishtown Spring Nationals
Englishtown Summer Nationals
Englishtown Fall Nationals
Rotary Day
Pan American Day 1
Pan American Day 2
MIR - World Street Finals

 

i am hoping to hit some events this year and get some seat time.

 

God willing , I will be running this season. I'm about 80% done with my changes.

 

I hope to be ready by opening day. but Im not going to rush it whats a couple weeks after 2 years of hard work ! PS helping my partner with his car was worth the wait MISSION ACCOMPLISHED!