RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Rotary Drag Racing (https://www.rx7club.com/rotary-drag-racing-167/)
-   -   Who's racing in 2010? (https://www.rx7club.com/rotary-drag-racing-167/whos-racing-2010-a-881736/)

ultimatejay 01-10-10 07:27 PM

Who's racing in 2010?
 
Ok guys, last year sucked ass with the economy and many racers kept their cars in the garages and keyboard raced all year. :lol:

Who's comin out in 2010 and whatcha got planned?

I'm finally doing my paint and body on my all motor RX2 and plan to pep up the motor and hit some more racing this year. What about you guys???? Lets all get out there this year. What ya say?

13B-RX3 01-10-10 08:27 PM

God willing, 2010 will be a big year for me. The chassis is finally done! Hopefully the motor will get built soon!

jamespond24 01-10-10 08:49 PM

I'm getting an automatic on mine FB for this coming year. Hoping in getting into mid to low 9's if my balls are big enough to keep the throttle floored. :D

enzo250 01-10-10 08:51 PM

I have some unfinished business :)

Trots*88TII-AE* 01-10-10 09:08 PM

^ First understatement of the year!

I'm hoping to get my ass to the track and bust into the 10's. Car's getting a cage and shedding some lb's right now. FC, stock suspension 13BT. I just hope my motor holds up.

jamespond24 01-10-10 09:13 PM


Originally Posted by enzo250 (Post 9728815)
I have some unfinished business :)

BTW what is the fastest stock chassis w/aftermarket tranny in the U.S.?

ErnieT 01-10-10 10:21 PM

Hopefully I will drop my et's as well. Gonna build a spare SemiPP motor too. May drop that in for the PanAm's and the 80mm back for that event.

pedro 01-10-10 10:28 PM

im hoping to race in the importface off i ran last year with a full bridge all motor carb.i was happy this time.i just install a 13B TII set at 25 psi. its been to cold here to run her.friday ill tune her and get ready for sunday importface off.

13B-RX3 01-10-10 11:05 PM


Originally Posted by ErnieT (Post 9729010)
Hopefully I will drop my et's as well. Gonna build a spare SemiPP motor too. May drop that in for the PanAm's and the 80mm back for that event.


About time you come over to the dark side and kick that bridge port shit to the curb!

ultimatejay 01-11-10 12:24 AM


Originally Posted by 13B-RX3 (Post 9728768)
God willing, 2010 will be a big year for me. The chassis is finally done! Hopefully the motor will get built soon!

Motor built? I thought you already dyno'd your motor. What happened with that motor?

Originally Posted by jamespond24 (Post 9728809)
I'm getting an automatic on mine FB for this coming year. Hoping in getting into mid to low 9's if my balls are big enough to keep the throttle floored. :D

Right on, good luck

Originally Posted by enzo250 (Post 9728815)
I have some unfinished business :)

Good luck Enzo. :icon_tup:


Originally Posted by Trots*88TII-AE* (Post 9728844)
^ First understatement of the year!

I'm hoping to get my ass to the track and bust into the 10's. Car's getting a cage and shedding some lb's right now. FC, stock suspension 13BT. I just hope my motor holds up.

Keep us posted.

Originally Posted by ErnieT (Post 9729010)
Hopefully I will drop my et's as well. Gonna build a spare SemiPP motor too. May drop that in for the PanAm's and the 80mm back for that event.

Sounds good Ernie, good luck to you too.


Originally Posted by pedro (Post 9729037)
im hoping to race in the importface off i ran last year with a full bridge all motor carb.i was happy this time.i just install a 13B TII set at 25 psi. its been to cold here to run her.friday ill tune her and get ready for sunday importface off.

Pedro, tell us more about your setup and times, we need more all motor guys here.

13B-RX3 01-11-10 01:02 AM

I had the time and money so i decided to build it right. I have one built and bagged up in the garage, one that i am going to build to put in the car, and enough stuff to build one more. Hopefully it will be one of those "if you have it you will never need it" kinda things!

mazda rx2 rotary 01-11-10 01:14 AM

who's is racing in 2010
 
i know i will see Ujay at the track.shit it is only the second week of 2010.i have had my hot rod out two times this year.over the long new year week end i installed my anti-roll bar and my spool!!!!the anti-roll bar helped out 100% now the car does not torque roll the body/chassis.as for the spool the car goes real straight now.at irwindale my 1/8 mile improved to a 1.26 sixty foot 6.03 @ 111.at fontana i went 1.33 sixty foot 6.11 @ 110 in the 1/8 9.700 @ 135 in the 1/4.when i went to fontana saturday for the street legals they limited me to a 10 second pass.the first pass i went a 1.300 sixty 6.05 @ 111 in the 1/8 then stood on the brakes,it went 11.00.that pass would have been a 9.60 something.i talked to the track manager after that pass and he gave me the green light to make full passes!!!it went a 9.76 9.73 9.700 playing with the tune up!!it seems that fontana is about .10th slower then irwindale!!the quickest 1/8 mile i had at fontana before saturday was a 6.12.so i think that 6.05 at fontana is going to be a 5.90 something at irwindale!!!i will be at irwindale this thursday 1/14/10 to see if i will finally get my 5.90 or better 1/8 mile time slip.maybe i will see you there Ujay?have you heard anything about the R100?

JZG 01-11-10 04:32 AM

Another Allmotor here. Hoping to break into the 10's in the next few weeks.

ultimatejay 01-11-10 01:18 PM


Originally Posted by mazda rx2 rotary (Post 9729305)
i know i will see Ujay at the track.shit it is only the second week of 2010.i have had my hot rod out two times this year.over the long new year week end i installed my anti-roll bar and my spool!!!!the anti-roll bar helped out 100% now the car does not torque roll the body/chassis.as for the spool the car goes real straight now.at irwindale my 1/8 mile improved to a 1.26 sixty foot 6.03 @ 111.at fontana i went 1.33 sixty foot 6.11 @ 110 in the 1/8 9.700 @ 135 in the 1/4.when i went to fontana saturday for the street legals they limited me to a 10 second pass.the first pass i went a 1.300 sixty 6.05 @ 111 in the 1/8 then stood on the brakes,it went 11.00.that pass would have been a 9.60 something.i talked to the track manager after that pass and he gave me the green light to make full passes!!!it went a 9.76 9.73 9.700 playing with the tune up!!it seems that fontana is about .10th slower then irwindale!!the quickest 1/8 mile i had at fontana before saturday was a 6.12.so i think that 6.05 at fontana is going to be a 5.90 something at irwindale!!!i will be at irwindale this thursday 1/14/10 to see if i will finally get my 5.90 or better 1/8 mile time slip.maybe i will see you there Ujay?have you heard anything about the R100?

Sounds like your on top of things as usual Chris. :icon_tup:
1.26 60ft! :bigeyes:. Must be nice. hehe. Weather down here in OC is unreal. It was 80 degrees on Saturday and Miami was in the 30's! Great time to race, but I have my car all apart getting ready for paint. I'll try and make it out on Thurs, but I have been busy at work.


Originally Posted by JZG (Post 9729476)
Another Allmotor here. Hoping to break into the 10's in the next few weeks.

Nice, got any pics of your car and setup?

JZG 01-11-10 03:08 PM

2 Attachment(s)
It's not my car, it's a customers. He's unable to race it this season so he's kindly let us race it to see if we can crack a 10. Best ET to date is 11.16



http://www.youtube.com/watch?v=QB5bVvcpUbQ

Slammedblk7 01-11-10 05:02 PM

I hope that within the next few months I can finally put down some comparable numbers to everyone then hit the track for the 1st time in 5 years.

ultimatejay 01-11-10 09:11 PM


Originally Posted by 13B-RX3 (Post 9729296)
I had the time and money so i decided to build it right. I have one built and bagged up in the garage, one that i am going to build to put in the car, and enough stuff to build one more. Hopefully it will be one of those "if you have it you will never need it" kinda things!

Well I guess your right.... 700+ horsepower is not enough. :lol::lol::lol: :scratch:
Good luck, I have been anxiously waiting to see you run your 3 and I know many others are too. :icon_tup:

ultimatejay 01-11-10 09:13 PM


Originally Posted by JZG (Post 9730320)
It's not my car, it's a customers. He's unable to race it this season so he's kindly let us race it to see if we can crack a 10. Best ET to date is 11.16



http://www.youtube.com/watch?v=QB5bVvcpUbQ

Nice clean setup you got there. Looks like a daily driver? Right hand drive eh? Where are you located?

13B-RX3 01-11-10 10:17 PM


Originally Posted by ultimatejay (Post 9731168)
Well I guess your right.... 700+ horsepower is not enough. :lol::lol::lol: :scratch:
Good luck, I have been anxiously waiting to see you run your 3 and I know many others are too. :icon_tup:

Lets just say i have a few plans for the car in the very near future. If it all works out it should be a VERY wild ride!!!

SPEED_NYC 01-12-10 12:27 AM

i'm hoping to be at the track regularly this year as well.

JZG 01-12-10 12:54 AM


Originally Posted by ultimatejay (Post 9731177)
Nice clean setup you got there. Looks like a daily driver? Right hand drive eh? Where are you located?

It's not used as a daily driver, although it could be if the owner wanted to.
Location is New Zealand.

AnthonyNYC 01-12-10 12:55 AM

I'll race at the following events. I'll be at MIR for the other ones as a spectator.

Englishtown Spring Nationals
Englishtown Summer Nationals
Englishtown Fall Nationals
Rotary Day
Pan American Day 1
Pan American Day 2
MIR - World Street Finals

justturbo2 01-12-10 07:50 AM

i am hoping to hit some events this year and get some seat time.

ALNY93R1 01-12-10 04:30 PM

God willing , I will be running this season. I'm about 80% done with my changes.

BOOM 01-12-10 05:58 PM

I hope to be ready by opening day. but Im not going to rush it whats a couple weeks after 2 years of hard work ! PS helping my partner with his car was worth the wait MISSION ACCOMPLISHED!


All times are GMT -5. The time now is 01:42 PM.


© 2024 MH Sub I, LLC dba Internet Brands